Rima Phone = 195if correct seems like a very short number for IP access,unless it is to a PPP server in you Company or Campus > > ** Ascend TNT Terminal Server **> > ascend%> > --> Hmm... a prompt. Sending "ppp".> > ppp> > PPP: Not enabledseems to be reporting that it is not equipped to provide PPP service Usually a password prompt would be expected to initiate a login & PasswordBEFORE initiation of any PPP Better get info on the real number of the PPP server MarvS On 10/2/07, Antonio Olivares <olivares14031@xxxxxxxxx> wrote:> Rima,>> One way of troubleshooting your connection is to open up another terminal and> take a look at /var/log/messages and look for an error message from there.>> Another possibility is that the file /etc/resolv.conf does not have the>> For instance, I use Awesomenet INC> http://www.awesomenet.net/support_serversettings.html> as my ISP and it has the the following> DNS for all area codes>> Primary: 168.215.176.2> Secondary: 12.176.80.9>> It sufficed to add two lines to /etc/resolv.conf>> nameserver 168.215.176.2> nameserver 12.176.80.9>> Check the DNS(Domain Name Servers) for your ISP and add that to the> /etc/resolv.conf file. Otherwise, If the issue is not resolved,> please feel free to take a look at Jacques post-install page:>> http://linmodems.technion.ac.il/post-install.html>> Hope this cures your problem.>> Regards,>> Antonio>>> On 10/2/07, Rima Massabni <rimamassabni@xxxxxxxxx> wrote:> > hi,> >> > I have successfully installed and configured a driver for my Conexant modem,> > but some error occurred while using the "wvdial" command...> > here's what I get:> >> >> > XXX@XXX-laptop:~$ sudo wvdial> > --> WvDial: Internet dialer version 1.56> > --> Initializing modem.> > --> Sending: ATZ> > ATZ> > OK> > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> > OK> > --> Modem initialized.> > --> Sending: ATDT195> > --> Waiting for carrier.> > ATDT195> > CONNECT 460800> > --> Carrier detected. Waiting for prompt.> > ** Ascend TNT Terminal Server **> > ascend%> > --> Hmm... a prompt. Sending "ppp".> > ppp> > PPP: Not enabled> > ascend%> > --> Hmm... a prompt. Sending "ppp".> > ppp> > PPP: Not enabled> > ascend%> > --> Hmm... a prompt. Sending "ppp".> > ppp> > PPP: Not enabled> > ascend%> > --> Hmm... a prompt. Sending "ppp".> > ppp> > PPP: Not enabled> > ascend%> > --> Hmm... a prompt. Sending "ppp".> > --> Don't know what to do! Starting pppd and hoping for the best.> > --> Starting pppd at Tue Oct 2 12:59:50 2007> > --> Pid of pppd: 5809> > --> Using interface ppp0> > --> pppd: �[06][06][08]P[11][06][08]> > --> pppd: �[06][06][08]P[11][06][08]> > --> pppd: �[06][06][08]P[11][06][08]> > --> pppd: �[06][06][08]P[11][06][08]> > --> pppd: �[06][06][08]P[11][06][08]> > --> pppd: �[06][06][08]P[11][06][08]> > --> pppd: �[06][06][08]P[11][06][08]> > --> Disconnecting at Tue Oct 2 13:00:21 2007> > --> The PPP daemon has died: A modem hung up the phone (exit code = 16)> > --> man pppd explains pppd error codes in more detail.> > --> Try again and look into /var/log/messages and the wvdial and pppd> > man pages for more information.> > --> Auto Reconnect will be attempted in 5 seconds> >> >> >> > and here is the /etc/wvdial.conf:> >> >> >> > Code: [Dialer Defaults]> > Init1 = ATZ> > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> > Modem Type = Analog Modem> > ISDN = 0> > New PPPD = yes> > Phone = 195> > Modem = /dev/modem> > Username = XXX> > Carrier Check = no> > Password = XXX> > Baud = 460800> >> >> >> >> > I have no clue what's wrong...so, any help will be appreciated!> >>
