Jack,
Please send to the List not to me directly, for faster service
First uninstall the hsfmodem package following its directions.
$ sudo hsfconfig --help
or similar will report the uninstall command.
Its drivers are competing for resources.
Than reboot.
If sl-modem-daemon properly runs
$ ls -l /dev/ttySL0
should report a link
/dev/ttySL0 --> /dev/pts/N , N some number.
$ lsmod | grep ungrab
and
$ lsmod | grep slam
should report ungrab-winmodem and slamr drivers loaded
indicating that the modem has been setup properly.
If OK
$ sudo wvdial /etc/wvdial.conf
will find the modem.
Read the wvdial.txt to guide an edit:
$ sudo gedit /etc/wvdial.conf
Save and dialout with:
$ sudo wvdial
MarvS
On 10/2/07, Jack Matatula <jrmatatula@xxxxxxxxx> wrote:
> Marv,
> I still have a problem, as follow:
>
> Installing the Debian packages supporting autoloading
> (Reading database ... 91346 files and directories currently installed.)
> Preparing to replace sl-modem-daemon 2.9.10+2.9.9d+e-pre2-5build1 (using sl-modem-daemon_2.9.10+2.9.9d+e-pre2-5build1_i386.deb) ...
> Shutting down SmartLink Modem driver normally ... no slmodemd daemon running.
> Unloading modem driver from kernel ... none found.
> Unpacking replacement sl-modem-daemon ...
> Setting up sl-modem-daemon (2.9.10+2.9.9d+e-pre2-5build1) ...
> FATAL: Error inserting slamr (/lib/modules/2.6.20-15-generic/extra/slamr.ko): Cannot allocate memory
> FATAL: Error inserting slamr (/lib/modules/2.6.20-15-generic/extra/slamr.ko): Cannot allocate memory
> Starting SmartLink Modem driver for: slamr0.
> Creating /dev/modem symlink, pointing to: /dev/ttySL0.
>
>
> Copying over newer files
> cp: cannot stat `sl-modem-daemon.modutils': No such file or directory
> Making folder /lib/modules/2.6.20-15-generic/extra
> Copying drivers to /lib/modules/2.6.20-15-generic/extra
> Checking driver install
> hsfengine.ko hsfmc97sis.ko hsfsoar.ko snd-hda-intel.ko
> hsfhda.ko hsfmc97via.ko hsfusbcd2.ko ungrab-winmodem.ko
> hsfmc97ali.ko hsfosspec.ko slamr.ko
> hsfmc97ati.ko hsfpcibasic2.ko slusb.ko
> hsfmc97ich.ko hsfserial.ko snd-hda-codec.ko
> Finished installs.
> Informing the System
>
> Starting function tests, loading drivers:
> FATAL: Error inserting slamr (/lib/modules/2.6.20-15-generic/extra/slamr.ko): Cannot allocate memory
> Running diagnostic:
>
> [ 24.620000] slamr: SmartLink AMRMO modem.
> [ 27.028000] slamr: probe 10b9:5457 SL1800 card...
> [ 27.032000] slamr: mc97 codec is SIL27
> [ 27.032000] slamr: slamr0 is SL1800 card.
> [ 59.980000] slamr: SmartLink AMRMO modem.
> [ 59.984000] slamr: probe 10b9:5457 SL1800 card...
> [ 59.984000] slamr: mc97 codec is SIL27
> [ 59.988000] slamr: slamr0 is SL1800 card.
> [ 60.048000] slamr: SmartLink AMRMO modem.
> [ 60.052000] slamr: probe 10b9:5457 SL1800 card...
> [ 60.052000] slamr: mc97 codec is SIL27
> [ 60.052000] slamr: slamr0 is SL1800 card.
> [ 776.752000] slamr: SmartLink AMRMO modem.
> [ 776.756000] slamr: probe 10b9:5457 SL1800 card...
> [ 776.760000] slamr: mc97 codec is SIL27
> [ 776.760000] slamr: slamr0 is SL1800 card.
> [ 776.868000] slamr: SmartLink AMRMO modem.
> [ 776.872000] slamr: probe 10b9:5457 SL1800 card...
> [ 776.872000] slamr: mc97 codec is SIL27
> [ 776.876000] slamr: slamr0 is SL1800 card.
> [ 793.536000] slamr: SmartLink AMRMO modem.
> [ 793.544000] slamr: probe 10b9:5457 SL1800 card...
> [ 793.548000] slamr: mc97 codec is SIL27
> [ 793.548000] slamr: slamr0 is SL1800 card.
> [ 2029.996000] slamr: SmartLink AMRMO modem.
> [ 2030.000000] slamr: probe 10b9:5457 SL1800 card...
> [ 2030.000000] slamr: mc97 codec is SIL27
> [ 2030.000000] slamr: slamr0 is SL1800 card.
> [ 2030.104000] slamr: SmartLink AMRMO modem.
> [ 2030.108000] slamr: probe 10b9:5457 SL1800 card...
> [ 2030.112000] slamr: mc97 codec is SIL27
> [ 2030.112000] slamr: slamr0 is SL1800 card.
> [ 2055.920000] slamr: SmartLink AMRMO modem.
> [ 2055.924000] slamr: probe 10b9:5457 SL1800 card...
> [ 2055.924000] slamr: mc97 codec is SIL27
> [ 2055.924000] slamr: slamr0 is SL1800 card.
> [ 2459.856000] slamr: SmartLink AMRMO modem.
> [ 2459.860000] slamr: probe 10b9:5457 SL1800 card...
> [ 2459.860000] slamr: mc97 codec is SIL27
> [ 2459.860000] slamr: slamr0 is SL1800 card.
> [ 2459.936000] slamr: SmartLink AMRMO modem.
> [ 2459.940000] slamr: probe 10b9:5457 SL1800 card...
> [ 2459.944000] slamr: mc97 codec is SIL27
> [ 2459.944000] slamr: slamr0 is SL1800 card.
> [ 2491.068000] slamr: SmartLink AMRMO modem.
> [ 2491.068000] slamr: probe 10b9:5457 SL1800 card...
> [ 2491.072000] slamr: mc97 codec is SIL27
> [ 2491.072000] slamr: slamr0 is SL1800 card.
>
> ports should be created by:
> slmodemd -c USA /dev/slamr0
> error: mdm setup: cannot open dev `/dev/slamr0': No such device
> error: cannot setup device `/dev/slamr0'
> Checking for success
> Port creation with slmodemd failed.
> Read the Slamr.txt record, other 1st_Read.txt CountryList.txt wvdial.txt files and the sample wvdial.conf.
>
> Jack
>
>
> ----- Original Message ----
> From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
> To: Jack Matatula <jrmatatula@xxxxxxxxx>
> Sent: Tuesday, October 2, 2007 11:45:34 AM
> Subject: Re: Model Dial Up
>
> Jack
>
> RE: ATI3 - Lucent SoftModem Version 3.1.113 for
>
> PCI slot PCI ID SubsystemID Name
> ---------- --------- --------- --------------
> 00:08.0 10b9:5457 1025:102b Modem: ALi
>
> unequivocally established that the ungrab-winmodem + slamr drivers
> must be used. Run
>
> ./scanModem test 10b9:5459
> and all the cogent information will be written to the output files.
>
> The slamr driver was written for 10b9:5459 and sister chipsets.
> Maintainer Sasha however was never provided the detailed specs for the
> predecessor 10b9:5457 chipset and the support included in slamr for it
> is his best guest.
>
> The have been both successes and failures for 10b9:5459 based modems,
> for reasons that will remain obscure.
>
> But from http://linmodems.technion.ac.il/packages/smartlink/ubuntu/
> download the slamr-2.6.20-15-generic.tar.gz . Under Linux unpack with:
> $ tar zxf slam*.tar.gz
> Move into the new folder
> $ cd slamr-2.6.20-15-generic
> and browse the files. Then run
> $ sudo ./setup
> and follow the ourput instructions.
>
> MarvS
>
>
>
>
>
> On 10/1/07, Jack Matatula <jrmatatula@xxxxxxxxx> wrote:
> > Marv,
> > Another information using Microsoft diagnosis:
> >
> > Modem information: Lucent Technologies Soft Modem AMR
> >
> > Value: PC\VEN_10B9&DEV_5457&SUBSYS_102B1025&REV00
> >
> > Modem Diagnostic:
> > ATQ0V1E0 - OK
> > AT+GMM - H.324 video-ready rev. 1.0
> > AT+FCLASS=? - 0,1
> > AT#CLS=? - COMMAND NOT SUPPORTED
> > AT+GCI? - +GCI:54
> > AT+GCI=? - OK
> > ATI1 - OK
> > ATI2 - OK
> > ATI3 - Lucent SoftModem Version 3.1.113
> > ATI4 - Built on 05/07/2002 14:55:11
> > ATI5 - 3.1.113, AMR ALi1535p MB, AC97 ID:SIL REV:0x27, 17
> > ATI6 - OK
> > ATI7 - AMR ALi1535p MB
> >
> > Btw, I use Ubuntu Feisty, thank you for your help
> >
> > Jack
> >
> >
> > ____________________________________________________________________________________
> > Tonight's top picks. What will you watch tonight? Preview the hottest shows on Yahoo! TV.
> > http://tv.yahoo.com/
> >
> >
>
>
>
>
>
>
> ____________________________________________________________________________________
> Yahoo! oneSearch: Finally, mobile search
> that gives answers, not web links.
> http://mobile.yahoo.com/mobileweb/onesearch?refer=1ONXIC
>
