Paul Download from http://linmodems.technion.ac.il/packages/smartlink/ the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with: $ tar zxf SLMODEMD.gcc4.1.tar.gz and read instructions therein. But briefly, the modem is setup with command: sudo slmodemd -c NEW_ZEALAND --alsa hw:0,6 reporting dynamic creation of ports: /dev/ttySL0 --> /dev/pts/N , with N some number Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance. The 0x10573055 chipset is supported by the combination of snd-hda-intel and slmodemd Antonio, The only chips not supported currently are the two 0x14f1???? Conexant chips and the LSI/Agere 0x11c11040, though other LSI are. MarvS scanModem maintainer On 9/21/07, pault200@xxxxxxxxx <pault200@xxxxxxxxx> wrote: > Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server. > Do use the following as the email Subject Line: > SomeName, YourCountry kernel 2.6.20-16-generic > This will alert cogent experts, and distinguish cases in the Archives. > YourCountry will enable Country Code guidance. > Occassionally responses are blocked by an Internet Provider mail filters. > So in a day, also check the Archived responses at http://www.linmodems.org . > Local Linux experts can be found through: http://www.linux.org/groups/index.html > -------------------------- System information ---------------------------- > CPU=i686, > Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Fri Aug 31 00:55:27 UTC 2007 > scanModem update of: 2007_Sept_07 > The modem symbolic link is /dev/modem -> ttySL0 > > There are no blacklisted modem drivers in /etc/modprobe* files > USB modem not detected by lsusb > > > Several modems are supported by drivers with ALSA, the Advanced Linux Sound Architecture software. > Copying ALSA diagnostics to Modem/ALSAroot.tgz > ALSAversion = 1.0.13 > > Modem or candidate host audio card have firmware information and diagnostics: > > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:1b.0 8086:27d8 1043:1263 Audio device: Intel Corporation 82801G > > Modem interrupt assignment and sharing: > 16: 3821 0 IO-APIC-fasteoi uhci_hcd:usb4, HDA Intel > --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > [ 22.776000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 > [ 22.776000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 > > === Finished modem firmware and bootup diagnostics section. === > === Next deducing cogent software === > > 8086:27d8 is a High Definition Audio card, possibly hosting a soft modem. > Bootup diagnostics lack ALSA data. > > The HDA modem codec file is: /proc/asound/card0/codec#1 > ----------------------------------- > Codec: Motorola Si3054 > Address: 1 > Vendor Id: 0x10573055 > Subsystem Id: 0x104310c6 > Revision Id: 0x100700 > > The audio card hosts a softmodem chip with Vendor ID: 0x10573055 > > For candidate modem in PCI bus: 00:1b.0 > Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G > Primary PCI_id 8086:27d8 > Subsystem PCI_id 1043:1263 > Softmodem codec or Vendor from diagnostics: Motorola_Si3054, a Motorola type. > from Archives: > > > This is a NEW softmodem case! Please send the output ModemData.txt > to DISCUSS@xxxxxxxxxxxxx , even if further assistance is not needed. > It will enrich the Archive and help others! > ------------------------------------------- > Lacking a dsp (digital signal processing) chip, the modem is a software > intensive or "softmodem" type. Its primary controller manages the traffic > with the CPU. But the software needed is specified in the Subsystem. > ----------------------------------------- > Support type needed or chipset: slmodemd > > An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel > provides Low Level support enabling contact with the modem hardware. > For all BUT Conexant chip soft modems (using hsfmodem software) > complementary High Level support is through a Smartlink utility: slmodemd > > Download from http://linmodems.technion.ac.il/packages/smartlink/ > the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with: > $ tar zxf SLMODEMD.gcc4.1.tar.gz > and read instructions therein. But briefly, the modem is setup with command: > sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6 > reporting dynamic creation of ports: > /dev/ttySL0 --> /dev/pts/N , with N some number > Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance. > > Already loaded into the kernel is snd-hda-intel and audio drivers it depends on, > displayed by: lsmod | grep snd_hda_intel > Module Size Used by > ------------------------------------- > snd_hda_intel 21912 1 > snd_hda_codec 205056 1 snd_hda_intel > snd_pcm 79876 7 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_hda_codec,snd_pcm_oss > snd 54020 16 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > snd_page_alloc 10888 5 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_hda_intel,snd_pcm > > > The diagnostic outputs for this softmodem section have their raw information in > folders and text files under /proc/asound/ which you can browse. The information > is from files: > /proc/asound/pcm > ------------------------------- > 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 > 00-00: ALC861 Analog : ALC861 Analog : playback 1 : capture 2 > > /proc/asound/modules > ------------------------------- > 0 snd_hda_intel > 10573055 > ------------------------------- > > ------------------------------- > Current support status of HDA cards is: > Vendor IDs Chip maker Support type > ---------- ---------- ------------- > 0x14f12bfa Conexant hsfmodem , not slmodemd compatible > 0x14f12c06 Conexant hsfmodem , not slmodemd compatible > 0x11c13026 AgereSystems snd-hda-intel, slmodemd supported > 0x11c11040 AgereSystems " " support not yet available. > 0x11c13055 AgereSystems " " , " > 0x163c3055 Smartlink " " , " > 0x163c3155 " " " , " > 0x10573055 Motorola " " , " > 0x10573155 " " " , "" > as of October 2006. > > /proc/asound/card0/codec#1 > ------------------------------- > > > and from the command: > aplay -l | grep -i modem > card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem] > > ----------------end Softmodem section -------------- > > Writing Intel.txt > Writing Smartlink.txt > ============ end Smartlink section ===================== > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.1.2 > and the compiler used in kernel assembly: 4.1.2 > > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.1 > linuc_headers base folder /lib/modules/2.6.20-16-generic/build > > However some compilations and executable functions may need additional files, > in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ . > For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default. > > Compressed files at: /usr/src/kqemu.tar.bz2 /usr/src/sl-modem.tar.bz2 > > > If a driver compilation files with message including some lack of some FileName.h (stdio.h for example. > Some additional kernel-header files need installation to /usr/include. > For Debian/Ubuntu related distributions, run the following command to display the needed package list: > $ sudo apt-get -s install linux-kernel-devel > While some of the files may be on the install CD, others may have to be found through http://packages.ubuntu.com > > For Ubuntu Feisty, additional packages required were: > libc6-dev linux-libc-dev > available through http://packages.ubuntu.com/ , if not on the install CD. > Such packages may have different names for other Linux distributions. > Try installing just the libc6-dev, then test the compile again. > > > Checking pppd properties: > -rwsr-xr-- 1 root dip 269224 2007-04-05 15:41 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > sudo chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > sudo chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/YourSystem.txt concerning other COMM channels: eth0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for the experts > should trouble shooting be necessary. > ========================================================== > > # start/stop the daemon when the USB modem is connected > KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon" > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: lrwxrwxrwx 1 root root 6 2007-09-21 16:45 /dev/modem -> ttySL0 > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > /etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected > /etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon" > /etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected > /etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon" > Within /etc/modprobe.conf files: > /etc/modprobe.d/alsa-base.~1~:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base.~1~:options snd-via82xx-modem index=-2 > /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 > /etc/modprobe.d/alsa-base.~4~:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base.~4~:options snd-via82xx-modem index=-2 > /etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0) > /etc/modprobe.d/alsa-base.~3~:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base.~3~:options snd-via82xx-modem index=-2 > /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem > /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem > /etc/modprobe.d/alsa-base.~2~:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base.~2~:options snd-via82xx-modem index=-2 > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- >
