Re: Paul NewZealand kernel 2.6.20-16-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Paul,

Looks like for your modem

 0x10573055  Motorola          "             "    ,      "
support not yet available.

 The audio card hosts a softmodem chip with Vendor ID:  0x10573055

 For candidate modem in PCI bus:  00:1b.0
  Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G
     Primary PCI_id  8086:27d8
   Subsystem PCI_id  1043:1263
   Softmodem codec or Vendor from diagnostics: Motorola_Si3054, a Motorola type.
                             from    Archives:

Regards,

Antonio

On 9/20/07, pault200@xxxxxxxxx <pault200@xxxxxxxxx> wrote:
>  Only plain text email is forwarded by the  DISCUSS@xxxxxxxxxxxxx List Server.
>  Do use the following as the email Subject Line:
>           SomeName, YourCountry  kernel 2.6.20-16-generic
>  This will alert cogent experts, and  distinguish cases in the Archives.
>  YourCountry will enable Country Code guidance.
>  Occassionally responses are blocked by an Internet Provider mail filters.
>  So in a day, also check the Archived responses at http://www.linmodems.org .
>  Local Linux experts can be found through: http://www.linux.org/groups/index.html
> --------------------------  System information ----------------------------
> CPU=i686,
> Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Fri Aug 31 00:55:27 UTC 2007
>  scanModem update of:  2007_Sept_07
> The modem symbolic link is /dev/modem -> ttySL0
>
>  There are no blacklisted modem drivers in /etc/modprobe*  files
> USB modem not detected by lsusb
>
>
> Several modems are supported by drivers with ALSA, the Advanced Linux Sound Architecture software.
> Copying ALSA diagnostics to Modem/ALSAroot.tgz
> ALSAversion = 1.0.13
>
> Modem or candidate host audio card have firmware information and diagnostics:
>
>  PCI slot       PCI ID          SubsystemID     Name
>  ----------     ---------       ---------       --------------
>  00:1b.0        8086:27d8       1043:1263       Audio device: Intel Corporation 82801G
>
>  Modem interrupt assignment and sharing:
>  16:       3821          0   IO-APIC-fasteoi   uhci_hcd:usb4, HDA Intel
>  --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
> [   22.776000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
> [   22.776000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
>
>  === Finished modem firmware and bootup diagnostics section. ===
>  === Next deducing cogent software ===
>
> 8086:27d8 is a High Definition Audio card, possibly hosting a soft modem.
> Bootup diagnostics lack ALSA data.
>
>  The HDA modem codec file is: /proc/asound/card0/codec#1
> -----------------------------------
> Codec: Motorola Si3054
> Address: 1
> Vendor Id: 0x10573055
> Subsystem Id: 0x104310c6
> Revision Id: 0x100700
>
>  The audio card hosts a softmodem chip with Vendor ID:  0x10573055
>
>  For candidate modem in PCI bus:  00:1b.0
>   Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G
>      Primary PCI_id  8086:27d8
>    Subsystem PCI_id  1043:1263
>    Softmodem codec or Vendor from diagnostics: Motorola_Si3054, a Motorola type.
>                              from    Archives:
>
>
>  This is a NEW softmodem case!  Please send the output ModemData.txt
>  to DISCUSS@xxxxxxxxxxxxx , even if further assistance is not needed.
>  It will enrich the Archive and help others!
>  -------------------------------------------
>  Lacking a dsp (digital signal processing) chip, the modem is a software
>  intensive or "softmodem" type. Its primary controller manages the traffic
>  with the CPU. But the software needed is specified in the Subsystem.
>  -----------------------------------------
> Support type needed or chipset: slmodemd
>
>  An ALSA (Advanced Linux Sound Architecture) modem driver:  snd-hda-intel
>  provides Low Level support enabling contact with the modem hardware.
>  For all BUT Conexant chip soft modems (using hsfmodem software)
>  complementary High Level support is through a Smartlink utility:  slmodemd
>
>  Download from http://linmodems.technion.ac.il/packages/smartlink/
>  the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with:
>        $ tar zxf SLMODEMD.gcc4.1.tar.gz
>  and read instructions therein. But briefly, the modem is setup with command:
>        sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6
>  reporting dynamic creation of ports:
>        /dev/ttySL0 --> /dev/pts/N   , with N some number
>  Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
>
>  Already loaded into the kernel is snd-hda-intel and audio drivers it depends on,
>  displayed by:  lsmod | grep snd_hda_intel
> Module                  Size  Used by
> -------------------------------------
> snd_hda_intel          21912  1
> snd_hda_codec         205056  1 snd_hda_intel
> snd_pcm                79876  7 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_hda_codec,snd_pcm_oss
> snd                    54020  16 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
> snd_page_alloc         10888  5 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_hda_intel,snd_pcm
>
>
> The diagnostic outputs for this softmodem section have their raw information in
> folders and text files under /proc/asound/ which you can browse. The information
> is from files:
>        /proc/asound/pcm
> -------------------------------
> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
> 00-00: ALC861 Analog : ALC861 Analog : playback 1 : capture 2
>
>        /proc/asound/modules
> -------------------------------
>  0 snd_hda_intel
>        10573055
> -------------------------------
>
> -------------------------------
> Current support status of HDA cards is:
>  Vendor IDs  Chip maker     Support type
>  ----------  ----------    -------------
>  0x14f12bfa  Conexant      hsfmodem , not slmodemd compatible
>  0x14f12c06  Conexant      hsfmodem , not slmodemd compatible
>  0x11c13026  AgereSystems  snd-hda-intel, slmodemd supported
>  0x11c11040  AgereSystems      "             "     support not yet available.
>  0x11c13055  AgereSystems      "             "    ,      "
>  0x163c3055  Smartlink         "             "    ,      "
>  0x163c3155    "               "             "    ,      "
>  0x10573055  Motorola          "             "    ,      "
>  0x10573155     "              "             "    ,      ""
> as of October 2006.
>
>        /proc/asound/card0/codec#1
> -------------------------------
>
>
> and from the command:
>        aplay -l | grep -i modem
> card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
>
> ----------------end Softmodem section --------------
>
> Writing Intel.txt
> Writing Smartlink.txt
> ============ end Smartlink section =====================
>
>  Completed candidate modem analyses.
>
>  The base of the UDEV device file system is: /dev/.udev
>
>  Versions adequately match for the compiler installed: 4.1.2
>             and the compiler used in kernel assembly: 4.1.2
>
>
>
>  Minimal compiling resources appear complete:
>   make utility - /usr/bin/make
>   Compiler version 4.1
>   linuc_headers base folder /lib/modules/2.6.20-16-generic/build
>
>  However some compilations and executable functions may need additional files,
>  in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
>  For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu,  linux-libc-dev). The also required headers of package libc6 are commonly installed by default.
>
> Compressed files at: /usr/src/kqemu.tar.bz2 /usr/src/sl-modem.tar.bz2
>
>
> If a driver compilation files with message including some lack of some FileName.h (stdio.h for example.
> Some additional kernel-header files need installation to /usr/include.
> For Debian/Ubuntu related distributions, run the following command to display the needed package list:
> $ sudo apt-get -s install linux-kernel-devel
> While some of the files may be on the install CD, others may have to be found through http://packages.ubuntu.com
>
> For Ubuntu Feisty, additional packages required were:
>  libc6-dev linux-libc-dev
> available through http://packages.ubuntu.com/ , if not on the install CD.
> Such packages may have different names for other Linux distributions.
> Try installing just the libc6-dev, then test the compile again.
>
>
> Checking pppd properties:
>        -rwsr-xr-- 1 root dip 269224 2007-04-05 15:41 /usr/sbin/pppd
>
> In case of an "error 17" "serial loopback" problem, see:
>    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
> To enable dialout without Root permission do:
>        $ su - root  (not for Ubuntu)
>        sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
>        sudo chmod a+x /usr/sbin/pppd
>
> Checking settings of:   /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
>   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> Read Modem/YourSystem.txt concerning other COMM channels: eth0
> Which can interfere with Browser naviagation.
>
>  Don't worry about the following, it is for the experts
>  should trouble shooting be necessary.
> ==========================================================
>
> # start/stop the daemon when the USB modem is connected
> KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
>  Checking for modem support lines:
>  --------------------------------------
>     /device/modem symbolic link:   lrwxrwxrwx 1 root root 6 2007-09-21 16:45 /dev/modem -> ttySL0
> slmodemd created symbolic link /dev/ttySL0:
>     Within /etc/udev/ files:
> /etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
> /etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
> /etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
> /etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
>     Within /etc/modprobe.conf files:
> /etc/modprobe.d/alsa-base.~1~:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base.~1~:options snd-via82xx-modem index=-2
> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
> /etc/modprobe.d/alsa-base.~4~:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base.~4~:options snd-via82xx-modem index=-2
> /etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ;  modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0)
> /etc/modprobe.d/alsa-base.~3~:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base.~3~:options snd-via82xx-modem index=-2
> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
> /etc/modprobe.d/alsa-base.~2~:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base.~2~:options snd-via82xx-modem index=-2
>     Within any ancient /etc/devfs files:
>
>     Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux