Hi Marvin,
first of all thank you very much for your help. Unfortunately is seems
that I might have some issues with the "make" command.
I did doanload martian-full-20061203.tar.gz and unpackedand moved to
that dir (it has btw created a directory "martian" not
"martian-full-20061203, so I even tried rename it, but with the result
were the same). Already the "make clean" commands seems not wot work
properly see below:
tati@tati:~/Desktop/martian-full-20061203$ ls
ChangeLog INSTALL Makefile modem scripts
Concept kmodule martian.h README
tati@tati:~/Desktop/martian-full-20061203$ make clean
make -C kmodule/ clean
make[1]: Entering directory
`/home/tati/Desktop/martian-full-20061203/kmodule'
make -C /lib/modules/2.6.20-16-386/build
M="/home/tati/Desktop/martian-full-20061203/kmodule" clean
make: Entering an unknown directory
make: *** /lib/modules/2.6.20-16-386/build: No such file or directory.
Stop.
make: Leaving an unknown directory
make[1]: *** [clean] Error 2
make[1]: Leaving directory
`/home/tati/Desktop/martian-full-20061203/kmodule'
make: *** [clean] Error 2
tati@tati:~/Desktop/martian-full-20061203$
tati@tati:~/Desktop/martian-full-20061203$ make all
make -C kmodule/ modules
make[1]: Entering directory
`/home/tati/Desktop/martian-full-20061203/kmodule'
make -C /lib/modules/2.6.20-16-386/build
M="/home/tati/Desktop/martian-full-20061203/kmodule" modules
make: Entering an unknown directory
make: *** /lib/modules/2.6.20-16-386/build: No such file or directory.
Stop.
make: Leaving an unknown directory
make[1]: *** [modules] Error 2
make[1]: Leaving directory
`/home/tati/Desktop/martian-full-20061203/kmodule'
make: *** [all] Error 2
tati@tati:~/Desktop/martian-full-20061203$
further hints?
Again many Thanks in advance Maurizio
Marvin Stodolsky ha scritto:
Maurizio
Please try using the generic package from
http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
the martian-full-20061203.tar.gz
Under Linux unpack with:
$ tar zxf martian*.tar.gz
Move in
$ cd martian-full-20061203
$ make clean
$ make all
$ sudo make install
Subsequently
$ sudo modprobe martian_dev
will install the driver
Do
$ martian_modem --help
to get the options list
$ martian_modem --info countries
to get the countries list
$ sudo martian_modem --country=ch
should create the ports and setup the modem
Open a 2nd console or TAB a new window
$ sudo wvdialconf /etc/wvdial.conf
should find the modem at /dev/ttySM0
Start on this process & report back.
marvS
$ sudo martian_modem -c
On 9/7/07, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
Maurico
Re: `/home/tati/Desktop/martian-ubuntu-2.6.20-16-generic/kmodule'
make -C /lib/modules/2.6.20-16-386/build
-------
These are version mismatched.
We'll striaghten it out in tomorrow.
I'm too sleepy now
MarvS
On 9/6/07, Maurizio Togni <maurizio.togni@xxxxxxxxxx> wrote:
Hre it is Jaques (as text and attachment)
-----------------
/lib/modules/2.6.20-15-generic/:
build
initrd
kernel
madwifi
modules.alias
modules.ccwmap
modules.dep
modules.ieee1394map
modules.inputmap
modules.isapnpmap
modules.ofmap
modules.pcimap
modules.seriomap
modules.symbols
modules.usbmap
volatile
/lib/modules/2.6.20-16-386/:
initrd
kernel
madwifi
modules.alias
modules.ccwmap
modules.dep
modules.ieee1394map
modules.inputmap
modules.isapnpmap
modules.ofmap
modules.pcimap
modules.seriomap
modules.symbols
modules.usbmap
volatile
/lib/modules/2.6.20-16-generic/:
build
initrd
kernel
madwifi
modules.alias
modules.ccwmap
modules.dep
modules.ieee1394map
modules.inputmap
modules.isapnpmap
modules.ofmap
modules.pcimap
modules.seriomap
modules.symbols
modules.usbmap
volatile
Linux tati 2.6.20-16-386 #2 Fri Aug 31 00:51:58 UTC 2007 i686 GNU/Linux
-------------------
Jacques Goldberg ha scritto:
Maurizio
There is no point in trying make install and further when make all has
failed.
The problem with make all is probably caused by different Ubuntu
versions.
Marv knows Ubuntu and will address your problem.
I know nothing about Ubuntu and similar (Debian) Linux distributions.
The only way by which I could help you would be if you could type the
two following commands EXACTLY as shown and send me the file
jacques.txt which they will produce. Thanks - Jacques:
ls /lib/modules/*/ > jacques.txt
uname -a >> jacques.txt
Maurizio Togni wrote:
Jacques, Many Thanks for your support I'm getting closer but still
having some troubles (due most probably to my not very advanced Linux
experience). I did the steps you indicated but when I run the INSTALL
procedure step by steps it seems that I'm having some troubles
executing some of the commands (I've also tried with "sudo" but seems
not to help to much).
Below a dump of the commands and results I would very much appreciate
if you could further help and tell me what I'm doing wrong.
Again thanks in advance very much for your help.
Maurizio
--------------------------------------------
tati@tati:~/Desktop$ ls
evolution-mail.desktop martian-ubuntu-2.6.20-16-generic.tar.gz
firefox.desktop mozilla-thunderbird.desktop
gcalctool.desktop rhythmbox.desktop
google-picasa.desktop totem.desktop
tati@tati:~/Desktop$ tar zxf martian-ubuntu-2.6.20-16-generic.tar.gz
tati@tati:~/Desktop$ cd martian-ubuntu-2.6.20-16-generic
tati@tati:~/Desktop/martian-ubuntu-2.6.20-16-generic$ ls
ChangeLog INSTALL Makefile modem scripts
Concept kmodule martian.h README wvdial.txt
tati@tati:~/Desktop/martian-ubuntu-2.6.20-16-generic$ make all
make -C kmodule/ modules
make[1]: Entering directory
`/home/tati/Desktop/martian-ubuntu-2.6.20-16-generic/kmodule'
make -C /lib/modules/2.6.20-16-386/build
M="/home/tati/Desktop/martian-ubuntu-2.6.20-16-generic/kmodule" modules
make: Entering an unknown directory
make: *** /lib/modules/2.6.20-16-386/build: No such file or
directory. Stop.
make: Leaving an unknown directory
make[1]: *** [modules] Error 2
make[1]: Leaving directory
`/home/tati/Desktop/martian-ubuntu-2.6.20-16-generic/kmodule'
make: *** [all] Error 2
tati@tati:~/Desktop/martian-ubuntu-2.6.20-16-generic$ su
Password:
su: Authentication failure
Spiacente.
tati@tati:~/Desktop/martian-ubuntu-2.6.20-16-generic$ sudo su
Password:
root@tati:/home/tati/Desktop/martian-ubuntu-2.6.20-16-generic# make
install
make -C kmodule/ install
make[1]: Entering directory
`/home/tati/Desktop/martian-ubuntu-2.6.20-16-generic/kmodule'
make -C /lib/modules/2.6.20-16-386/build
M="/home/tati/Desktop/martian-ubuntu-2.6.20-16-generic/kmodule"
modules_install
make: Entering an unknown directory
make: *** /lib/modules/2.6.20-16-386/build: No such file or
directory. Stop.
make: Leaving an unknown directory
make[1]: *** [install] Error 2
make[1]: Leaving directory
`/home/tati/Desktop/martian-ubuntu-2.6.20-16-generic/kmodule'
make: *** [install] Error 2
root@tati:/home/tati/Desktop/martian-ubuntu-2.6.20-16-generic# sudo
make install
make -C kmodule/ install
make[1]: Entering directory
`/home/tati/Desktop/martian-ubuntu-2.6.20-16-generic/kmodule'
make -C /lib/modules/2.6.20-16-386/build
M="/home/tati/Desktop/martian-ubuntu-2.6.20-16-generic/kmodule"
modules_install
make: Entering an unknown directory
make: *** /lib/modules/2.6.20-16-386/build: No such file or
directory. Stop.
make: Leaving an unknown directory
make[1]: *** [install] Error 2
make[1]: Leaving directory
`/home/tati/Desktop/martian-ubuntu-2.6.20-16-generic/kmodule'
make: *** [install] Error 2
root@tati:/home/tati/Desktop/martian-ubuntu-2.6.20-16-generic#
modprobe martian_dev
FATAL: Module martian_dev not found.
root@tati:/home/tati/Desktop/martian-ubuntu-2.6.20-16-generic#
modprobe martian_dev
FATAL: Module martian_dev not found.
root@tati:/home/tati/Desktop/martian-ubuntu-2.6.20-16-generic# sudo
modprobe martian_dev
FATAL: Module martian_dev not found.
root@tati:/home/tati/Desktop/martian-ubuntu-2.6.20-16-generic# ls
ChangeLog Concept INSTALL kmodule Makefile martian.h modem
README scripts wvdial.txt
root@tati:/home/tati/Desktop/martian-ubuntu-2.6.20-16-generic#
---------------------------------------------
Jacques Goldberg ha scritto:
Maurizio
ModemData.txt says:
BEGIN
The modem has a supported Lucent/Agere Mars or Apollo DSP (digital
signal processing) chipset. Support packages for 2.6.n kernels are at:
http://phep2.technion.ac.il/linmodems/packages/ltmodem/kernel-2.6/martian/
See AgereDSP.txt for Details.
END
so you go to
http://phep2.technion.ac.il/linmodems/packages/ltmodem/kernel-2.6/martian/
You download the file martian-ubuntu-2.6.20-16-generic.tar.gz
You unpack it with the command:
tar zxf martian-ubuntu-2.6.20-16-generic.tar.gz
You enter the software for the driver with
cd martian-ubuntu-2.6.20-16-generic
There, you read the file named INSTALL and you do step by step what
it says (IGNORE x86_64 platform).
The "root" directory wuioted there is NOT the /root (note the /)
directory of user "root" but the directory
martian-ubuntu-2.6.20-16-generic
Your dreams are shared and will remain dreams. We are a handful of
volunteers unable to create a "dream" installer for each of so many
modems under so many versions of Linux.
In addition, you will see that when your modem will work, you will
already have learnt a lot about using Linux, specially command lines.
Jacques
maurizio.togni wrote:
Hi Linux/Ubuntu Friends
Hi just installed for the first time the ubuntu version on a Compaq
Evo N610c / 256k RAM and now almost everything works fine but as I
need to use very often a modem connection (modem already integrated
in the Notebook) and I need now your help to get it possibly
configured and recognized by ubuntu.
Now, I'm not a very technical person and I must admit that it was
already quite difficult for me to find out the Modem chipset
following a procedure I fould on
(http://help.ubuntu-it.org/7.04/ubuntu/internet/it/connect-to-internet.html)and
frankly speaking I'm quite confuse now when I read what I need to
do next (root?, Compiling?,..).
Could some one help me and tell what I really need to do next? My
dream as I really don't know nothing about linux and compilers
would be to download a self extracting application that would
recognize and configure my modems, but well if this is only a dream
then I would really need a step by step procedure (possibly written
for non technical/linux person) so that I can hopefully really follow.
Many thanks for your great support!!! :-)
Maurizio
Below the ModemData.txt file with the Chipset (if I read it rigth
Agere.DSP)
--------------------------------------------------------------------------------------------
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List
Server.
Do use the following as the email Subject Line:
SomeName, YourCountry kernel 2.6.20-16-generic This will
alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail
filters.
So in a day, also check the Archived responses at
http://www.linmodems.org .
Local Linux experts can be found through:
http://www.linux.org/groups/index.html
-------------------------- System information
----------------------------
CPU=i686, Linux version 2.6.20-16-generic (root@terranova) (gcc
version 4.1.2
(Ubuntu 4.1.2-0ubuntu4)) #2 SMP Fri Aug 31 00:55:27 UTC 2007
scanModem update of: 2007_August_28
There are no blacklisted modem drivers in /etc/modprobe* files USB
modem not detected by lsusb
Several modems are supported by drivers with ALSA, the Advanced Linux
Sound Architecture software.
Copying ALSA diagnostics to Modem/ALSAroot.tgz
ALSAversion = 1.0.13
Modem or candidate host audio card have firmware information and
diagnostics:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
02:04.0 11c1:0450 1468:0450 Communication controller:
Agere Systems LT
WinModem
Modem interrupt assignment and sharing: 11: 36107
XT-PIC-XT yenta, yenta, Intel 82801CA-ICH3,
radeon@pci:0000:01:00.0
--- Bootup diagnostics for card in PCI slot 02:04.0 ----
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
For candidate modem in PCI bus: 02:04.0
Class 0780: 11c1:0450 Communication controller: Agere Systems LT
WinModem
Primary PCI_id 11c1:0450
Support type needed or chipset: Agere.DSP
The modem has a supported Lucent/Agere Mars or Apollo DSP (digital
signal processing) chipset. Support packages for 2.6.n kernels are at:
http://phep2.technion.ac.il/linmodems/packages/ltmodem/kernel-2.6/martian/
See AgereDSP.txt for Details.
DSP=1
Vendor 11c1 is Lucent Technologies with modem technology now under LSI
Inc. Their Linux code developer/maintainer is Soumyendu Sarkar.
Support for
a chipset and its continued maintenance is only initiated at the
request of a major
chipset buyer,
or comparable sponsor. Several different modem chipset types are
produced: with varying support under Linux.
Device ID Support Name Comment
--------- ------------- ----------- -----------------------------
0480 serial drivers Venus controller chipset 1673JV7
0440-045d martian Mars/Apollo DSP (digital signal
processing) chipsets
0462 none 56K.V90/ADSL Wildwire 048d
none SV2P soft modem 048(c or f)
AGRSM SV2P soft modem
0600 none soft modem, very few in the field.
0620 AGRSM Pinball soft modem, in some HP desktop PCs
062(1-3) none SV92PP,Pinball soft modem, in some HP
desktop PCs
martian - At
http://phep2.technion.ac.il/linmodems/packages/ltmodem/kernel-2.6/martian/
AGRSM - At
http://phep2.technion.ac.il/linmodems/packages/ltmodem/kernel-2.6/
agrsm-alpha.tar.bz2 potentially provides support for PCI_id chipsets
11c1:048c, 11c1:048f and 11c1:0620
in addition to prior support of Subsystems under Intel 8086:???? below
11C1:048C
11C1:048F
11C1:0620
8086:(2416 2426 7196 2486 24C6 24CD6 266D) are soft modem controllers,
better
supported through ALSA modem drivers and the Smartlink slmodemd
helper.
There has only been one reported success for 11c1:048c, 11c1:048f
and
11c1:0620. See:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00849.html
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00970.html
Interaction with experts will likely be necessary to get any of these
modems working.
0x0450 -- Mars 3 Mercury data fax Global board
-------------- end Agere Systems section -------------------
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.2
and the compiler used in kernel assembly: 4.1.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.20-16-generic/build
However some compilations and executable functions may need additional
files,
in the FileNames.h (so called kernel "h"eaders) collection installed
in /usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for
Debian/Ubuntu, linux-libc-dev). The also required headers of package
libc6 are commonly installed by default.
If a driver compilation files with message including some lack of some
FileName.h (stdio.h for example. Some additional kernel-header
files need installation to /usr/include.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:
$ sudo apt-get -s install linux-kernel-devel
While some of the files may be on the install CD, others may have
to be
found through http://packages.ubuntu.com
For Ubuntu Feisty, additional packages required were:
libc6-dev linux-libc-dev
available through http://packages.ubuntu.com/ , if not on the install
CD.
Such packages may have different names for other Linux distributions.
Try installing just the libc6-dev, then test the compile again.
Checking pppd properties:
-rwsr-xr-- 1 root dip 269224 2007-04-05 05:41 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
/lib/modules/2.6.20-15-generic/:
build
initrd
kernel
madwifi
modules.alias
modules.ccwmap
modules.dep
modules.ieee1394map
modules.inputmap
modules.isapnpmap
modules.ofmap
modules.pcimap
modules.seriomap
modules.symbols
modules.usbmap
volatile
/lib/modules/2.6.20-16-386/:
initrd
kernel
madwifi
modules.alias
modules.ccwmap
modules.dep
modules.ieee1394map
modules.inputmap
modules.isapnpmap
modules.ofmap
modules.pcimap
modules.seriomap
modules.symbols
modules.usbmap
volatile
/lib/modules/2.6.20-16-generic/:
build
initrd
kernel
madwifi
modules.alias
modules.ccwmap
modules.dep
modules.ieee1394map
modules.inputmap
modules.isapnpmap
modules.ofmap
modules.pcimap
modules.seriomap
modules.symbols
modules.usbmap
volatile
Linux tati 2.6.20-16-386 #2 Fri Aug 31 00:51:58 UTC 2007 i686 GNU/Linux
