Abel Sadly ========= The HDA modem codec file is: /proc/asound/card0/codec#1 ----------------------------------- Codec: Generic 11c1 Si3054 Address: 1 Vendor Id: 0x11c11040 ========= Support is not yet available for this chip: 0x11c11040 I have to fix the scanModem code to automate this message. MarvS scanModem maintainer On 9/6/07, Jacques Goldberg <goldberg@xxxxxxxxxxx> wrote: > Abel, > You write nothing (what you want), so I assume that you have not read > ModemData.txt far enough to see: > BEGIN > Download from http://linmodems.technion.ac.il/packages/smartlink/ > the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack > under Linux with: > $ tar zxf SLMODEMD.gcc4.1.tar.gz > and read instructions therein. But briefly, the modem is setup with > command: > sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6 > reporting dynamic creation of ports: > /dev/ttySL0 --> /dev/pts/N , with N some number > Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance. > > Already loaded into the kernel is snd-hda-intel and audio drivers it > depends on, > displayed by: lsmod | grep snd_hda_intel > > END > > Jacques > > Abel Marrero Santos wrote: >
