Купил модем Acer 3684WXMi не могу настроить модем. Система
AspLinux 11.2. Прошу помощи.
С уважением Сергей Казанцев
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry (K)K
ASPLinux release 11.2 (Ladoga)
Kernel 2.6.17-1.2157.1asp on an i686 kernel 2.6.17-1.2157.1asp
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org .
Local Linux experts can be found through: http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686, (K)K
ASPLinux release 11.2 (Ladoga)
Kernel 2.6.17-1.2157.1asp on an i686
Linux version 2.6.17-1.2157.1asp (build@xxxxxxxxxxxxxxxxxxxxx) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 Fri Aug 11 03:02:11 EEST 2006
scanModem update of: 2007_August_19
ALSAversion 1.0.11rc2
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 1025:0110 Audio device: Intel Corporation 82801G
Modem interrupt assignment and sharing:
201: 1440 IO-APIC-level HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
PCI->APIC IRQ transform: 0000:00:1b.0[A] -> IRQ 201
PCI: Setting latency timer of device 0000:00:1b.0 to 64
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
8086:27d8 is a High Definition Audio card, possibly hosting a soft modem.
Bootup diagnostics lack ALSA data.
The HDA modem codec file is: /proc/asound/card0/codec#1
-----------------------------------
Codec: Generic 11c1 ID 1040
Address: 1
Vendor Id: 0x11c11040
Subsystem Id: 0x10250110
Revision Id: 0x100200
The audio card hosts a softmodem chip with Vendor ID: 0x11c11040
The softmodem chip 0x11c11040 is not yet supported under Linux.
Code must be developed by manufacture LSI Inc.
See details in http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00915.html
Read InfoGeneral.txt about alternatives modem hardware.
Blacklisted modem driver lines in /etc/modprobe* files are:
A candidate driver could not be identified.
HDAmodemChip=0x11c13026
For candidate modem in PCI bus: 00:1b.0
Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G
Primary PCI_id 8086:27d8
Subsystem PCI_id 1025:0110
Softmodem codec or Vendor from diagnostics: 11c1, an AgereSystems type.
from Archives: 11c1, an AgereSystems type.
The HDA card softmodem chip is 0x11c13026
Lacking a dsp (digital signal processing) chip, the modem is a software
intensive or "softmodem" type. Its primary controller manages the traffic
with the CPU. But the software needed is specified in the Subsystem.
-----------------------------------------
Support type needed or chipset: slmodemd
An ALSA (Advanced Linux Sound Architecture) modem driver:
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.0.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD.gcc4.0.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
slmodemd -c YOUR_COUNTRY --alsa
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
The diagnostic outputs for this softmodem section have their raw information in
folders and text files under /proc/asound/ which you can browse. The information
is from files:
/proc/asound/pcm
-------------------------------
00-02: ALC882 Digital : ALC882 Digital : playback 1
00-01: ALC882 Analog : ALC882 Analog : capture 2
00-00: ALC882 Analog : ALC882 Analog : playback 1 : capture 2
/proc/asound/modules
-------------------------------
0 snd_hda_intel
11c11040
-------------------------------
-------------------------------
Current support status of HDA cards is:
Vendor IDs Chip maker Support type
---------- ---------- -------------
0x14f12bfa Conexant hsfmodem , not slmodemd compatible
0x14f12c06 Conexant hsfmodem , not slmodemd compatible
0x11c13026 AgereSystems snd-hda-intel, slmodemd supported
0x11c11040 AgereSystems " " support not yet available.
0x11c13055 AgereSystems " " , "
0x163c3055 Smartlink " " , "
0x163c3155 " " " , "
0x10573055 Motorola " " , "
0x10573155 " " " , ""
as of October 2006.
/proc/asound/card0/codec#1
-------------------------------
and from the command:
aplay -l | grep -i modem
----------------end Softmodem section --------------
Writing Intel.txt
Writing Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udevdb
Versions adequately match for the compiler installed: 4.0.2
and the compiler used in kernel assembly: 4.0.2
linux-headers-2.6.17-1.2157.1asp resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
kernel-source-2.6.17-1.2157.1asp
If a driver compilation files with message including some lack of some FileName.h (stdio.h for example.
Some additional kernel-header files need installation to /usr/include.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
$ sudo apt-get -s install linux-kernel-devel
While some of the files may be on the install CD, others may have to be found through http://packages.ubuntu.com
For Ubunut feisty, additional packages required were:
build-essential curl debhelper dpkg-dev g++ g++-4.1 gettext git-core gitk
html2text intltool-debian kernel-package kernel-wedge libc6-dev
libcurl3-gnutls libdigest-sha1-perl liberror-perl libstdc++6-4.1-dev
linux-libc-dev po-debconf rcs tcl8.4 tk8.4
Checking pppd properties:
-r-xr-xr-x 1 root root 304544 ��8 2006 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
lock
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
