Hi,
I ran the scanModem utility found on your site, and was able to identify
my modem. Unfortunately, I hit information overload while reading the
files generated by it, and am unsure where to go from here. Any help
would be appreciated.
Thanks,
Andrew
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry Fedora release 7 (Moonshine)
Kernel kernel 2.6.21-1.3194.fc7
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org .
Local Linux experts can be found through: http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686, Fedora release 7 (Moonshine)
Kernel
Linux version 2.6.21-1.3194.fc7 (kojibuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:35:01 EDT 2007
scanModem update of: 2007_June_19
ALSAversion 1.0.14rc2
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:08.0 163c:3052 163c:3052 Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem
Modem interrupt assignment and sharing:
--- Bootup diagnositcs for card in PCI slot 00:08.0 ----
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 16
0000:00:08.0: ttyS1 at I/O 0xd008 (irq = 16) is a 16450
0000:00:08.0: ttyS2 at I/O 0xd010 (irq = 16) is a 8250
0000:00:08.0: ttyS3 at I/O 0xd018 (irq = 16) is a 16450
Couldn't register serial port 0000:00:08.0: -28
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
For candidate modem in PCI bus: 00:08.0
Class 0703: 163c:3052 Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem
Primary PCI_id 163c:3052
Support type needed or chipset: slamr
The modem is supported by the Smartlink slamr driver
plus the slmodemd helper utility. Read the
Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
Writing Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.2
and the compiler used in kernel assembly: 4.1.2
Kernel-header resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
kernel-source-2.6.21-1.3194.fc7
Checking pppd properties:
-r-xr-xr-x 1 root root 312332 2006-12-01 07:54 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
lock
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/50-udev.rules:KERNEL=="modems/mwave*", NAME="%k", GROUP="uucp", MODE="0660"
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
