----- Original Message ----
From: Isamar Maia <isamar@xxxxxxxxx>
To: discuss@xxxxxxxxxxxxx
Sent: Thursday, July 5, 2007 10:04:33 AM
Subject: SL2800 with 2.6.20-1.2498.fc6
I am trying to use slmodem with a
SmartLink SL2800 PCI ID: 01:05.0
I compiled slmodem succesfully but when it loads,
it doesn't conclude the device detection and slmodemd doesn't load
properly.
Modem information:
01:05.0 Smart Link Ltd. Unknown device 2800
SubSystem: Smart Link Ltd. Unknown device 2801
When loading ungrab-winmodem and slamr modules,
I get from dmesg:
slamr: AMRM0 modem
slamr: probe: 2000:2800 SL2800 modem...
I tried booting with acpi=off, but not success also.
Procedure use:
modprobe ungrab-winmodem
modprobe slamr
slmodemd /dev/slamr0
error: mdm setup: cannot open dev /dev/slamr0: No such device
error: cannot setup device /dev/slamr0
What should I do in this case?
Thanks in advance.
--
Isamar Maia
Isamar,
Try to run as SuperUser (su -)
# modprobe ungrab-winmodem
# modprobe slamr
# mkdir -p /dev
# mknod -m 600 /dev/slamr0 c 242 0
# slmodemd -c BRAZIL /dev/slamr0
If you see a message similar to
SmartLink Soft Modem: version 2.9.11 Jun 4 2007 00:14:21
symbolic link `/dev/ttySL0' -> `/dev/pts/2' created.
modem `slamr0' created. TTY is `/dev/pts/2'
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
You have done it! Otherwise send what you have done and the messages that you are getting back.
Regards,
Antonio
____________________________________________________________________________________
Be a better Heartthrob. Get better relationship answers from someone who knows. Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?link=list&sid=396545433
