Alex RE:card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem] Subdevices: 1/1 Subdevice #0: subdevice #0==> # slmodemd --alsa hw:0 The proper setup COMMAND is: # slmodemd --alsa hw:0,6since the modem is subsdevice 6 on card 0 Follow Antonio's guidance and use wvdial,except don't use Stupid Mode = yesunless essential. On 6/18/07, Antonio Olivares <olivares14031@xxxxxxxxx> wrote:>>> ----- Original Message ----> From: Alexandre Penasso Teixeira <alexandre@xxxxxxxxxxxxxxxxxxx>> To: Linmodems <discuss@xxxxxxxxxxxxx>> Sent: Monday, June 18, 2007 10:13:30 AM> Subject: Modem Motorola HDA>> Hi developers,>> I have one modem sm56-hda, and build the new driver> slmodem-2.9.11-2007050 and ungrab-winmodem-20070505 alsa on.> make SUPPORT_ALSA=1>> I build ok, but after load the slmodemd I don't dialing... look it.>> ==> # aplay -l> **** List of PLAYBACK Hardware Devices ****> card 0: Intel [HDA Intel], device 0: ALC883 Analog [ALC883 Analog]> Subdevices: 0/1> Subdevice #0: subdevice #0> card 0: Intel [HDA Intel], device 1: ALC883 Digital [ALC883 Digital]> Subdevices: 1/1> Subdevice #0: subdevice #0> card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]> Subdevices: 1/1> Subdevice #0: subdevice #0>> ==> # slmodemd --alsa hw:0> SmartLink Soft Modem: version 2.9.11 Jun 18 2007 12:46:42> symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.> modem `hw:0' created. TTY is `/dev/pts/1'> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.>> ==> # minicom> Welcome to minicom 2.1>> OP+�+�ES: History Buffer, F-key Macros, Search History Buffer, I18n> Compilado em Nov 4 2005, 18:10:30.>> Pressione CTRL-A Z para ajuda sobre teclas especiais>> AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0> OK> atx3dt 225> NO CARRIER> ERROR>>> I have on phone-line running ok... with other notebook dialing ok... Are> you have suggestions ?>> []'s> Alexandre>>> Could you try it out with wvdial?> Add option Carrier check = no> Your wvdial.conf file should look something like>> [olivares@localhost ~]$ cat /etc/wvdial.conf>> [Dialer Defaults]> Modem = /dev/ttySL0> Baud = 460800> Init1 = ATZ> #Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> ISDN = 0> Modem Type = Analog Modem> Carrier Check = no> Stupid Mode = yes> Auto DNS = yes> Phone = your_phone_number> Username = your_username> Password = your_password>> Hope this helps,>> Antonio>>>>>>> ____________________________________________________________________________________> Need a vacation? Get great deals> to amazing places on Yahoo! Travel.> http://travel.yahoo.com/>
