Dear Linmodems Developer. Hi To Linmodems Developer. I received an edubuntu gnu/Linux Cd From http://www.edubuntu.com/, And installed it on my own computer it worked properly, And installed all hardware on my system, but modem doesn't work. My modem type is: "Modem: ALi Corporation SmartLink SmartPCI563 56K Modem" I searched in the net and Find Your Website and your solution. Downloaded ScanModem package and ran it on my system, The Following Attachment is Result Of it. I'm a newbie in Linux Please Help me Step by step To install modem And Connect to internet. You're sincere, Samad. > Only plain text email is forwarded by the > DISCUSS@xxxxxxxxxxxxx List Server. > Do use the following as the email Subject Line: > SomeName, YourCountry Ubuntu 7.04 kernel > 2.6.20-15-386 > This will alert cogent experts, and distinguish > cases in the Archives. > YourCountry will enable Country Code guidance. > Occassionally responses are blocked by an Internet > Provider mail filters. > So in a day, also check the Archived responses at > http://www.linmodems.org . > Local Linux experts can be found through: > http://www.linux.org/groups/index.html > -------------------------- System information > ---------------------------- > CPU=i686, Ubuntu 7.04 > Linux version 2.6.20-15-386 (root@palmer) (gcc > version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 Sun Apr 15 > 07:34:00 UTC 2007 > scanModem update of: 2007_May_11 > The modem symbolic link is /dev/modem -> ttySL0 > > ALSAversion 1.0.13 > USB modem not detected by lsusb > > Modem or host audio card candidates have firmware > information: > > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:0b.0 10b9:545a 201f:545a Modem: ALi Corporation > SmartLink SmartPCI563 56K Modem > > Modems interrupt assignment and sharing: > > --- Bootup diagnositcs for card in PCI slot 00:0b.0 > ---- > [ 18.888438] ACPI: PCI Interrupt 0000:00:0b.0[A] > -> GSI 19 (level, low) -> IRQ 16 > [ 18.891766] 0000:00:0b.0: ttyS2 at I/O 0xd028 > (irq = 16) is a 8250 > [ 18.893669] 0000:00:0b.0: ttyS3 at I/O 0xd040 > (irq = 16) is a 8250 > [ 18.894058] Couldn't register serial port > 0000:00:0b.0: -28 > > === Finished modem firmware and bootup diagnostics > section. === > === Next deducing cogent software === > > For candidate modem in PCI bus: 00:0b.0 > Class 0703: 10b9:545a Modem: ALi Corporation > SmartLink SmartPCI563 56K Modem > Primary PCI_id 10b9:545a > Support type needed or chipset: slamr > > > The modem is supported by the Smartlink slamr driver > plus the slmodemd helper utility. Read the > Smartlink.txt and Modem/YourSystem.txt for follow > through guidance. > > Writing Smartlink.txt > ============ end Smartlink section > ===================== > > Completed candidate modem analyses. > > The base of the UDEV device file system is: > /dev/.udev > > Versions adequately match for the compiler > installed: 4.1.2 > and the compiler used in kernel > assembly: 4.1.2 > > Kernel-header resources needed for compiling are > not manifestly ready! > > If compiling is necessary packages must be > installed, providing: > linux-headers-2.6.20-15-386 > > > Checking pppd properties: > -rwsr-xr-x 1 root dip 269224 Apr 5 07:11 > /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, > see: > > http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > sudo chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > sudo chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: > Permission denied > see > http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/YourSystem.txt concerning other COMM > channels: eth0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for the > experts > should trouble shooting be necessary. > ========================================================== > > # start/stop the daemon when the USB modem is > connected > KERNEL=="slusb[0-9]*", GROUP="dialout", > RUN+="/etc/init.d/sl-modem-daemon" > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: lrwxrwxrwx 1 > root root 6 Jun 11 23:10 /dev/modem -> ttySL0 > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > /etc/udev/rules.d/030_sl-modem-daemon.rules:# > start/stop the daemon when the USB modem is > connected > /etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", > GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon" > /etc/udev/sl-modem-daemon.rules:# start/stop the > daemon when the USB modem is connected > /etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", > GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon" > Within /etc/modprobe.conf files: > /etc/modprobe.d/alsa-base:options snd-atiixp-modem > index=-2 > /etc/modprobe.d/alsa-base:options snd-via82xx-modem > index=-2 > /etc/modprobe.d/sl-modem-daemon.modutils:install > slamr modprobe --ignore-install ungrab-winmodem ; > modprobe --ignore-install slamr; test -e /dev/slamr0 > || (/bin/mknod -m 660 /dev/slamr0 c 242 0 > 2>/dev/null && chgrp dialout /dev/slamr0) > /etc/modprobe.d/blacklist-modem:# Uncomment these > entries in order to blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem:# blacklist > snd-atiixp-modem > /etc/modprobe.d/blacklist-modem:# blacklist > snd-via82xx-modem > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf > files: > > --------- end modem support lines -------- > > Send instant messages to your online friends http://uk.messenger.yahoo.com
