Re: help for modem driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is an IBM modem.
**** FOR MARV: I do not understand what happened to scanModem here.

Back to sunit.
This IBM model usually uses a Conexant HSF chipset.
Instructions are attached, but write this before starting:
HSF Ubuntu 6.10 kernel 2.6.17-10 (generic)

Success not guaranteed. Trying cannot harm. Please report success or failure!

Thanks - Jacques

sunit sinha wrote:
Hi !

I am using Thinkpad R51 model no.2887 MQ6. It is loaded with ubuntu 6.10.
Please help me to find necessary driver for the modem so that I can
make dial up internet connection. I am sending modemData.txt amd dmsg.txt.
Thanking you
Sunit Sinha
Kolkata
India





---- ModemData.txt  ----



Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
          SomeName, YourCountry Ubuntu 6.10  kernel 2.6.17-10-generic
This will alert cogent experts, and  distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org . Local Linux experts can be found through: http://www.linux.org/groups/index.html
--------------------------  System information ----------------------------
CPU=i686,  Ubuntu 6.10
Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
scanModem update of:  2007_May_11


ALSAversion 1.0.11
USB modem not detected by lsusb

Modem or host audio card candidates have firmware information:

PCI slot    PCI ID        SubsystemID    Name
----------    ---------    ---------    --------------
00:1f.6 8086:24c6 1014:0559 Modem: Intel Corporation 82801DB/DBL/DBM

Modem interrupt assignment and sharing:
11: 28757 XT-PIC uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, ehci_hcd:usb4, Intel 82801DB-ICH4, yenta, ipw2200, i915@pci:0000:00:02.0

--- Bootup diagnositcs for card in PCI slot 00:1f.6 ----
[17179571.384000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179571.384000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled

The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process,  but then enabled later. If modem drivers load
but the  modem is not responsive, read Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.


=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===

#####################################################################################################################

            ............  Dmesg.txt ............


***           CPU0
 0:     216160          XT-PIC  timer
 1:        430          XT-PIC  i8042
 2:          0          XT-PIC  cascade
 7:          0          XT-PIC  parport0
 8:          3          XT-PIC  rtc
 9:        985          XT-PIC  acpi
11: 28757 XT-PIC uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, ehci_hcd:usb4, Intel 82801DB-ICH4, yenta, ipw2200, i915@pci:0000:00:02.0
12:     126836          XT-PIC  i8042
14:      33542          XT-PIC  ide0
15:       2677          XT-PIC  ide1
NMI:          0
LOC:          0
ERR:          0
MIS:          0

[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[17179569.184000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable)
[17179569.184000] BIOS-e820: 000000001f6e0000 - 000000001f6f7000 (ACPI data) [17179569.184000] BIOS-e820: 000000001f6f7000 - 000000001f6f9000 (ACPI NVS) [17179569.184000] BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) [17179569.184000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 502MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 128736
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 124640 pages, LIFO batch:31
[17179569.184000] DMI present.
[17179569.184000] ACPI: RSDP (v002 IBM ) @ 0x000f6db0 [17179569.184000] ACPI: XSDT (v001 IBM TP-1V 0x00001270 LTP 0x00000000) @ 0x1f6eb17b [17179569.184000] ACPI: FADT (v003 IBM TP-1V 0x00001270 IBM 0x00000001) @ 0x1f6eb200 [17179569.184000] ACPI: SSDT (v001 IBM TP-1V 0x00001270 MSFT 0x0100000e) @ 0x1f6eb3b4 [17179569.184000] ACPI: ECDT (v001 IBM TP-1V 0x00001270 IBM 0x00000001) @ 0x1f6f6e0e [17179569.184000] ACPI: TCPA (v001 IBM TP-1V 0x00001270 PTL 0x00000001) @ 0x1f6f6e60 [17179569.184000] ACPI: BOOT (v001 IBM TP-1V 0x00001270 LTP 0x00000001) @ 0x1f6f6fd8 [17179569.184000] ACPI: DSDT (v001 IBM TP-1V 0x00001270 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:df800000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda8 ro quiet splash
[17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (013fa000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 599.549 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.188000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [17179569.188000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [17179569.216000] Memory: 500712k/514944k available (1910k kernel code, 13780k reserved, 1070k data, 308k init, 0k highmem) [17179569.216000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179569.296000] Calibrating delay using timer specific routine.. 1200.41 BogoMIPS (lpj=2400820)
[17179569.296000] Security Framework v1.0.0 initialized
[17179569.296000] SELinux:  Disabled at boot.
[17179569.296000] Mount-cache hash table entries: 512
[17179569.296000] CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 [17179569.296000] CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
[17179569.296000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179569.296000] CPU: L2 cache: 2048K
[17179569.296000] CPU: After all inits, caps: afe9f9bf 00000000 00000000 00000040 00000180 00000000 00000000
[17179569.296000] Checking 'hlt' instruction... OK.
[17179569.312000] SMP alternatives: switching to UP code
[17179569.312000] Freeing SMP alternatives: 16k freed
[17179569.312000] checking if image is initramfs... it is
[17179570.824000] Freeing initrd memory: 5564k freed
[17179570.824000] ACPI: Core revision 20060707
[17179570.824000] ACPI: Looking for DSDT ... not found!
[17179570.836000] ACPI: setting ELCR to 0200 (from 0800)
[17179570.844000] CPU0: Intel(R) Pentium(R) M processor 1.70GHz stepping 06
[17179570.844000] SMP motherboard not detected.
[17179570.844000] Local APIC not detected. Using dummy APIC emulation.
[17179570.844000] Brought up 1 CPUs
[17179570.844000] migration_cost=0
[17179570.848000] NET: Registered protocol family 16
[17179570.848000] EISA bus registered
[17179570.848000] ACPI: bus type pci registered
[17179570.848000] PCI: PCI BIOS revision 2.10 entry at 0xfd8e6, last bus=5
[17179570.848000] PCI: Using configuration type 1
[17179570.848000] Setting up standard PCI resources
[17179570.848000] ACPI: Found ECDT
[17179570.872000] ACPI: Interpreter enabled
[17179570.872000] ACPI: Using PIC for interrupt routing
[17179570.872000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[17179570.872000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[17179570.876000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[17179570.876000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[17179570.880000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[17179570.880000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[17179570.880000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[17179570.884000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[17179570.884000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.884000] PCI: Probing PCI hardware (bus 00)
[17179570.892000] Boot video device is 0000:00:02.0
[17179570.892000] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[17179570.892000] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[17179570.892000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179570.892000] PCI: Transparent bridge - 0000:00:1e.0
[17179570.892000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.904000] ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.
[17179570.904000] ACPI: Power Resource [PUBS] (on)
[17179570.908000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[17179570.912000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.912000] pnp: PnP ACPI init
[17179570.920000] pnp: PnP ACPI: found 13 devices
[17179570.920000] PnPBIOS: Disabled by ACPI PNP
[17179570.924000] PCI: Using ACPI for IRQ routing
[17179570.924000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179570.932000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[17179570.932000] PCI: Bus 3, cardbus bridge: 0000:02:00.0
[17179570.932000]   IO window: 00003000-000030ff
[17179570.932000]   IO window: 00003400-000034ff
[17179570.932000]   PREFETCH window: f0000000-f1ffffff
[17179570.932000]   MEM window: d2000000-d3ffffff
[17179570.932000] PCI: Bridge: 0000:00:1e.0
[17179570.932000]   IO window: 3000-7fff
[17179570.932000]   MEM window: d0200000-dfffffff
[17179570.932000]   PREFETCH window: f0000000-f7ffffff
[17179570.932000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179570.936000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[17179570.936000] PCI: setting IRQ 11 as level-triggered
[17179570.936000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[17179570.936000] NET: Registered protocol family 2
[17179570.976000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [17179570.976000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[17179570.976000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[17179570.976000] TCP: Hash tables configured (established 16384 bind 8192)
[17179570.976000] TCP reno registered
[17179570.976000] Simple Boot Flag at 0x35 set to 0x1
[17179570.976000] audit: initializing netlink socket (disabled)
[17179570.976000] audit(1179353726.976:1): initialized
[17179570.976000] VFS: Disk quotas dquot_6.5.1
[17179570.976000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.976000] Initializing Cryptographic API
[17179570.976000] io scheduler noop registered
[17179570.976000] io scheduler anticipatory registered
[17179570.976000] io scheduler deadline registered
[17179570.976000] io scheduler cfq registered (default)
[17179570.976000] isapnp: Scanning for PnP cards...
[17179571.332000] isapnp: No Plug & Play device found
[17179571.380000] Real Time Clock Driver v1.12ac
[17179571.380000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.380000] pnp: Device 00:0a activated.
[17179571.384000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[17179571.384000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[17179571.384000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179571.384000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[17179571.384000] mice: PS/2 mouse device common for all mice
[17179571.384000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.384000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.384000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179571.384000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[17179571.392000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.392000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.392000] EISA: Probing bus 0 at eisa.0
[17179571.392000] Cannot allocate resource for EISA slot 1
[17179571.392000] Cannot allocate resource for EISA slot 2
[17179571.392000] Cannot allocate resource for EISA slot 3
[17179571.392000] Cannot allocate resource for EISA slot 4
[17179571.392000] Cannot allocate resource for EISA slot 5
[17179571.392000] Cannot allocate resource for EISA slot 6
[17179571.392000] Cannot allocate resource for EISA slot 7
[17179571.392000] EISA: Detected 0 cards.
[17179571.392000] TCP bic registered
[17179571.392000] NET: Registered protocol family 1
[17179571.392000] NET: Registered protocol family 8
[17179571.392000] NET: Registered protocol family 20
[17179571.392000] Using IPI No-Shortcut mode
[17179571.392000] ACPI: (supports S0 S3 S4 S5)
[17179571.392000] Freeing unused kernel memory: 308k freed
[17179571.400000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179572.672000] Capability LSM initialized
[17179572.748000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[17179572.748000] ACPI: Processor [CPU] (supports 8 throttling states)
[17179572.752000] ACPI: Thermal Zone [THM0] (36 C)
[17179573.428000] ICH4: IDE controller at PCI slot 0000:00:1f.1
[17179573.428000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[17179573.432000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[17179573.432000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[17179573.432000] ICH4: chipset revision 1
[17179573.432000] ICH4: not 100% native mode: will probe irqs later
[17179573.432000] ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio [17179573.432000] ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio
[17179573.432000] Probing IDE interface ide0...
[17179573.720000] hda: HTS541060G9AT00, ATA DISK drive
[17179574.392000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.408000] Probing IDE interface ide1...
[17179575.144000] hdc: MATSHITADVD-RAM UJ-830Sx, ATAPI CD/DVD-ROM drive
[17179575.480000] ide1 at 0x170-0x177,0x376 on irq 15
[17179575.492000] hda: max request size: 128KiB
[17179575.508000] hda: 117210240 sectors (60011 MB) w/7539KiB Cache, CHS=65535/16/63, UDMA(100)
[17179575.508000] hda: cache flushes supported
[17179575.508000]  hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 >
[17179575.616000] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179575.616000] Uniform CD-ROM driver Revision: 3.20
[17179576.356000] usbcore: registered new driver usbfs
[17179576.356000] usbcore: registered new driver hub
[17179576.360000] USB Universal Host Controller Interface driver v3.0
[17179576.364000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[17179576.364000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179576.364000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179576.364000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179576.364000] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820
[17179576.364000] usb usb1: configuration #1 chosen from 1 choice
[17179576.368000] hub 1-0:1.0: USB hub found
[17179576.368000] hub 1-0:1.0: 2 ports detected
[17179576.484000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[17179576.484000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179576.484000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179576.484000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179576.484000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179576.484000] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
[17179576.488000] usb usb2: configuration #1 chosen from 1 choice
[17179576.488000] hub 2-0:1.0: USB hub found
[17179576.488000] hub 2-0:1.0: 2 ports detected
[17179576.592000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[17179576.592000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179576.592000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179576.592000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179576.592000] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
[17179576.592000] usb usb3: configuration #1 chosen from 1 choice
[17179576.592000] hub 3-0:1.0: USB hub found
[17179576.592000] hub 3-0:1.0: 2 ports detected
[17179576.700000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[17179576.700000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[17179576.700000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179576.700000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179576.700000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[17179576.700000] ehci_hcd 0000:00:1d.7: debug port 1
[17179576.700000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[17179576.700000] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd0100000
[17179576.704000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.704000] usb usb4: configuration #1 chosen from 1 choice
[17179576.704000] hub 4-0:1.0: USB hub found
[17179576.704000] hub 4-0:1.0: 6 ports detected
[17179576.876000] Attempting manual resume
[17179576.912000] kjournald starting.  Commit interval 5 seconds
[17179576.912000] EXT3-fs: mounted filesystem with ordered data mode.
[17179589.320000] Linux agpgart interface v0.101 (c) Dave Jones
[17179589.324000] agpgart: Detected an Intel 855 Chipset.
[17179589.324000] agpgart: Detected 8060K stolen memory.
[17179589.332000] agpgart: AGP aperture is 128M @ 0xe0000000
[17179590.788000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179590.968000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179591.292000] hw_random: RNG not detected
[17179591.576000] input: PC Speaker as /class/input/input1
[17179591.600000] Floppy drive(s): fd0 is 1.44M
[17179591.616000] FDC 0 is a National Semiconductor PC87306
[17179592.016000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179592.016000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[17179592.060000] parport: PnPBIOS parport detected.
[17179592.060000] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[17179592.096000] irda_init()
[17179592.096000] NET: Registered protocol family 23
[17179592.200000] pnp: Device 00:0c activated.
[17179592.200000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[17179592.200000] nsc-ircc, chip->init
[17179592.200000] nsc-ircc, Found chip at base=0x02e
[17179592.200000] nsc-ircc, driver loaded (Dag Brattli)
[17179592.200000] IrDA: Registered device irda0
[17179592.200000] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[17179592.836000] intel8x0_measure_ac97_clock: measured 55367 usecs
[17179592.836000] intel8x0: clocking to 48000
[17179593.036000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 [17179593.036000] serio: Synaptics pass-through port at isa0060/serio1/input0 [17179593.076000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[17179593.076000] Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512]
[17179593.076000] Yenta: Using INTVAL to route CSC interrupts to PCI
[17179593.076000] Yenta: Routing CardBus interrupts to PCI
[17179593.076000] Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64
[17179593.084000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[17179593.188000] e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
[17179593.188000] e100: Copyright(c) 1999-2005 Intel Corporation
[17179593.248000] ieee80211_crypt: registered algorithm 'NULL'
[17179593.252000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [17179593.252000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
[17179593.280000] ts: Compaq touchscreen protocol output
[17179593.304000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2kmprq
[17179593.304000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[17179593.304000] Driver 'ipw2200' needs updating - please use bus_type methods
[17179593.308000] Yenta: ISA IRQ mask 0x0430, PCI irq 11
[17179593.308000] Socket status: 30000007
[17179593.308000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff
[17179593.308000] cs: IO port probe 0x3000-0x7fff: clean.
[17179593.312000] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff [17179593.312000] pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
[17179593.328000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[17179593.328000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [17179593.352000] e100: eth0: e100_probe: addr 0xd0201000, irq 11, MAC addr 00:16:41:16:0B:46
[17179593.356000] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[17179593.356000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11 [17179593.356000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [17179593.624000] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[17179593.944000] cs: IO port probe 0x100-0x3af: clean.
[17179593.944000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[17179593.944000] cs: IO port probe 0x820-0x8ff: clean.
[17179593.944000] cs: IO port probe 0xc00-0xcf7: clean.
[17179593.944000] cs: IO port probe 0xa00-0xaff: clean.
[17179595.028000] NET: Registered protocol family 17
[17179597.468000] lp0: using parport0 (interrupt-driven).
[17179597.516000] Adding 1050800k swap on /dev/disk/by-uuid/795bc26e-f926-4068-9d77-a9a234ab5bba. Priority:-1 extents:1 across:1050800k [17179597.712000] eth1: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full.
[17179597.752000] EXT3 FS on hda8, internal journal
[17179598.092000] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[17179598.332000] input: TPPS/2 IBM TrackPoint as /class/input/input3
[17179628.708000] usb 4-4: new high speed USB device using ehci_hcd and address 2
[17179628.968000] usb 4-4: configuration #1 chosen from 1 choice
[17179629.096000] usbcore: registered new driver libusual
[17179629.260000] SCSI subsystem initialized
[17179629.368000] Initializing USB Mass Storage driver...
[17179629.368000] scsi0 : SCSI emulation for USB Mass Storage devices
[17179629.368000] usb-storage: device found at 2
[17179629.368000] usb-storage: waiting for device to settle before scanning
[17179629.368000] usbcore: registered new driver usb-storage
[17179629.368000] USB Mass Storage support registered.
[17179634.368000] usb-storage: device scan complete
[17179634.388000]   Vendor: JetFlash  Model: TS1GJFV30         Rev: 8.07
[17179634.388000] Type: Direct-Access ANSI SCSI revision: 02
[17179634.444000] SCSI device sda: 1982464 512-byte hdwr sectors (1015 MB)
[17179634.448000] sda: Write Protect is off
[17179634.448000] sda: Mode Sense: 03 00 00 00
[17179634.448000] sda: assuming drive cache: write through
[17179634.448000] SCSI device sda: 1982464 512-byte hdwr sectors (1015 MB)
[17179634.448000] sda: Write Protect is off
[17179634.448000] sda: Mode Sense: 03 00 00 00
[17179634.448000] sda: assuming drive cache: write through
[17179634.448000]  sda: sda1
[17179634.452000] sd 0:0:0:0: Attached scsi removable disk sda
[17179634.560000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179659.332000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179659.412000] NTFS volume version 3.1.
[17179665.844000] ACPI: AC Adapter [AC] (on-line)
[17179665.936000] ACPI: Battery Slot [BAT0] (battery present)
[17179665.980000] ACPI: Power Button (FF) [PWRF]
[17179665.980000] ACPI: Lid Switch [LID]
[17179665.980000] ACPI: Sleep Button (CM) [SLPB]
[17179666.116000] ACPI: ACPI Dock Station Driver
[17179666.264000] ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
[17179666.264000] ibm_acpi: http://ibm-acpi.sf.net/
[17179666.316000] pcc_acpi: loading...
[17179666.552000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[17179668.096000] [drm] Initialized drm 1.0.1 20051102
[17179668.096000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[17179668.096000] [drm] Initialized i915 1.5.0 20060119 on minor 0
[17179668.100000] [drm] Initialized i915 1.5.0 20060119 on minor 1
[17179669.116000] IBM machine detected. Enabling interrupts during APM calls.
[17179669.116000] apm: BIOS not found.
[17179673.380000] Non-volatile memory driver v1.2
[17179673.412000] input: /usr/sbin/thinkpad-keys as /class/input/input4
[17179673.568000] Bluetooth: Core ver 2.8
[17179673.568000] NET: Registered protocol family 31
[17179673.568000] Bluetooth: HCI device and connection manager initialized
[17179673.568000] Bluetooth: HCI socket layer initialized
[17179673.608000] Bluetooth: L2CAP ver 2.8
[17179673.608000] Bluetooth: L2CAP socket layer initialized
[17179673.644000] Bluetooth: RFCOMM socket layer initialized
[17179673.644000] Bluetooth: RFCOMM TTY layer initialized
[17179673.644000] Bluetooth: RFCOMM ver 1.7
[17179682.560000] NET: Registered protocol family 10
[17179682.560000] lo: Disabled Privacy Extensions
[17179682.560000] IPv6 over IPv4 tunneling driver
[17179685.976000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179693.068000] eth1: no IPv6 routers present
[17179709.256000] UDF-fs: No VRS found
[17179709.440000] ISO 9660 Extensions: RRIP_1991A

*************************************

_________________________________________________________________
Post your 2nd hand stuff for free on Yello.www.yello.in http://www.yello.in/home.php?m_source=hotmailtag&utm_medium=textlink&utm_content=in&utm_campaign=may
 If you do not already know, find out in your ModemData.txt if your modem is of 
type HSF or of type HCF.
 In the following, HxF stands for the one to be used.
 Note down your distribution, your processor, and your kernel (shown in the 
 System Information section of ModemData.txt).
-Go to http://www.linuxant.com/drivers
-Find the HxF menu in the left part of the screen.
-Read README.
-Read INSTALLATION.
-Click DOWNLOAD.
-Accept conditions.
-Find text: "You can download HxF modem packages from the driver
            download page." and click on that link.
-I very strongly recommend NOT TO LET YOURSELF BE ATTRACTED BY THE AUTOMATIC 
INSTALLER cnxtinstall.run. Just think: you need a connection to be able to use 
it, and this is what you do not have yet. Use the direct download page.
Its address is http://www.linuxant.com/drivers/hsf/full/downloads.php
Using it will not save you any time, on the contrary, because you will not know
what to look for and do with it.
-Since you have noted your distribution, your processor, and your kernel 
 (shown in the System Information section of ModemData.txt), identify the
 matching file.
-Download the matching file.
-Read again and, if you read this text under Windows, print the installation
 instructions matching the kind of driver file which you downloaded.
-If downloaded elsewhere (Windows on same computer or using an other computer),
 copy the downloaded file to your Linux working space.
-Now, under Linux, just follow the Linuxant installation instructions.

 NOTE:  the space on a floppy disk is sufficient for the driver file. This
is the simplest way to download under Windows on the same computer or to   
download on an other computer.
More tips to transfer files are available in
http://linmodems.technion.ac.il/first.html


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux