RE: Still the same message about the proxy ARP.
Ignore it. Just try:
$ ping -c2 217.146.186.221
which should return:
PING 217.146.186.221 (217.146.186.221) 56(84) bytes of data.
64 bytes from 217.146.186.221: icmp_seq=1 ttl=48 time=98.9 ms
64 bytes from 217.146.186.221: icmp_seq=2 ttl=48 time=99.3 ms
and then the names address:
$ ping -c 2 yahoo.co.uk
which should return:
PING yahoo.co.uk (217.146.186.221) 56(84) bytes of data.
64 bytes from rc1.vip.ird.yahoo.com (217.146.186.221): icmp_seq=1
ttl=48 time=100 ms
in which case you will be able to browse.
If still a problem see the PostInstall Howto at
http://132.68.73.235/linmodems/index.html
MarvS
On 5/16/07, Jarno Suni <j_suni@xxxxxxxxxxx> wrote:
--- Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
wrote:
> Jarno,
>
> All COMM channels except lo (loopback) was be closed
> before trying to
> use the modem.
> > determine ethernet address for proxy ARP"
> shows that the modem is trying to use sevices for
> Ethernet and that
> will not work.
I can close the eth0 channel by deselecting the Wirded
connection in network-admin. I get this, when the
dial-up connetion is on (that is output of plog and
ifconfig):
jarnos@jarnos-desktop:~$ plog
May 16 15:02:18 jarnos-desktop chat[5528]:
ATDP1067030^M^M
May 16 15:02:18 jarnos-desktop chat[5528]: CONNECT
May 16 15:02:18 jarnos-desktop chat[5528]: -- got it
May 16 15:02:18 jarnos-desktop pppd[5514]: Serial
connection established.
May 16 15:02:18 jarnos-desktop pppd[5514]: Using
interface ppp0
May 16 15:02:18 jarnos-desktop pppd[5514]: Connect:
ppp0 <--> /dev/modem
May 16 15:02:20 jarnos-desktop pppd[5514]: PAP
authentication succeeded
May 16 15:02:24 jarnos-desktop pppd[5514]: Cannot
determine ethernet address for proxy ARP
May 16 15:02:24 jarnos-desktop pppd[5514]: local IP
address 62.248.163.236
May 16 15:02:24 jarnos-desktop pppd[5514]: remote IP
address 62.248.163.1
jarnos@jarnos-desktop:~$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0
frame:0
TX packets:0 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
ppp0 Link encap:Point-to-Point Protocol
inet addr:62.248.163.236 P-t-P:62.248.163.1
Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST
MTU:1500 Metric:1
RX packets:5 errors:0 dropped:0 overruns:0
frame:0
TX packets:7 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:3
RX bytes:50 (50.0 b) TX bytes:87 (87.0 b)
Still the same message about the proxy ARP. Could this
have something to do with the DNS servers or search
domains (given in network-admin)?
--
Homepage: http://iki.fi/jarno.suni/
____________________________________________________________________________________
TV dinner still cooling?
Check out "Tonight's Picks" on Yahoo! TV.
http://tv.yahoo.com/
