Motorola with slamr driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Zello,
We are working on other  Motorola 1057:3052 cases, with some problems.Which Linux Distro and kernel are you using?Which slmodem-?Version? package did you do you fix on?
MarvS
---------- Forwarded message ----------From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>Date: May 3, 2007 8:48 PMSubject: Re: Fernando, Brazil, Fedora Core release 6 (Zod), kernel2.6.18-1.2798.fc6To: Jose Fernando de Jesus <jfernando@xxxxxxxxxxxxxxxx>Cc: Linmodems <discuss@xxxxxxxxxxxxx>

After
[root@localhost ~]# modprobe ungrab-winmodem[root@localhost ~]# modprobe slamr[root@localhost ~]# slmodemd -c BRAZIL /dev/slamr0what is shown by:#  dmesg | grep slamr
MarvS
On 5/3/07, Jose Fernando de Jesus <jfernando@xxxxxxxxxxxxxxxx> wrote:> On Thu, 3 May 2007 07:54:50 -0400, Marvin Stodolsky wrote> > Jose,> >> > Some improvements to the code have been made which may help> > From http://phep2.technion.ac.il/linmodems/packages/smartlink/> > download and use instead ungrab-winmodem_20070426.tar.gz> > and slmodem-2.9.11-20070430.tar.gz> > Unload your current ungrab-winmodem and slamr and ungrab-winmodem> > before doing the new installation> >> > It is this line in /etc/modprobe.conf (or your equivalent) which> > automates the /dev/slamr0 creation:> > install slamr modprobe --ignore-install ungrab-winmodem ;  modprobe> > --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660> > /dev/slamr0 c 242 0 2>/dev/null && chgrp uucp /dev/slamr0)> >> > Make sure your /dev/slamr0 has the following specs:> >> > $ ls -l  /dev/slamr0> > crw-rw---- 1 root uucp  242, 0> >> > There are now two successes with your 1057:3052  modem type.> > though the improved ungrab-winmodem was necessary.> > It now has the same code fix as the slmodem package> >> > MarvS>>    Marvin,>>    I have used the last packages you provided and have faced the same> message (I am as 'su -' below):>> [root@localhost ~]# modprobe ungrab-winmodem> [root@localhost ~]# modprobe slamr> [root@localhost ~]# slmodemd -c BRAZIL /dev/slamr0> error: mdm setup: cannot open dev `/dev/slamr0': No such device> error: cannot setup device `/dev/slamr0'>>    And the following specification:>> [root@localhost ~]# ls -l  /dev/slamr0> crw------- 1 root root 242, 0 Mai  3 14:33 /dev/slamr0> [root@localhost ~]#>>    What should I do now?>>    Thanks,>> José Fernando de Jesus> Physics Graduated> PhD Student on Astronomy(IAG-USP)> Rua do Matão 1226> Cidade Universitária> 05508-900  São Paulo  SP> Brasil>> Phone: 55 11 30912732> email: jfernando@xxxxxxxxxxxxxxxx> (:¿(c)2007(c)?:)> Rock'n'Roll!>>

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux