Hi, Marvin, thanks for your help.
> http://linmodems.technion.ac.il/bigarch/archive-
> seventh/msg00848.html
What should I do with this patch? Should I save it as a file .patch in
the folder patches/ on the slmodem directory? I did it and have installed
the slmodem and runned the scanmodem twice. I had the output attached. What
should I do now? It seems that the slmodem doens't work yet... I was unable
to run the slmodemd command. Is it the driver that I should use now?
Thanks again,
Cheers,
José Fernando de Jesus
Physics Graduated
PhD Student on Astronomy(IAG-USP)
Rua do Matão 1226
Cidade Universitária
05508-900 São Paulo SP
Brasil
Phone: 55 11 30912732
email: jfernando@xxxxxxxxxxxxxxxx
(:¿©2007©?:)
Rock'n'Roll!
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry Fedora Core release 6 (Zod)
Kernel kernel 2.6.18-1.2798.fc6
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org .
Local Linux experts can be found through: http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686, Fedora Core release 6 (Zod)
Kernel
Linux version 2.6.18-1.2798.fc6 (brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Mon Oct 16 14:54:20 EDT 2006
scanModem update of: 2007_March_15
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:03.0 1057:3052 1057:3020 Modem: Motorola Unknown device 3052
Modem interrupt assignment and sharing:
169: 0 0 IO-APIC-level uhci_hcd:usb3, libata
--- Bootup diagnositcs for card in PCI slot 01:03.0 ----
ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 18 (level, low) -> IRQ 169
0000:01:03.0: ttyS1 at I/O 0xa008 (irq = 169) is a 16450
0000:01:03.0: ttyS2 at I/O 0xa010 (irq = 169) is a 8250
0000:01:03.0: ttyS3 at I/O 0xa018 (irq = 169) is a 16450
Couldn't register serial port 0000:01:03.0: -28
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
For candidate modem in PCI bus: 01:03.0
Class 0703: 1057:3052 Modem: Motorola Unknown device 3052
Primary PCI_id 1057:3052
Support type needed or chipset: Motorola
Vendor=1057 is Motorola with some service provided through
vendor=11d4 Analog Devices Inc. Drivers are available for VERY FEW 2.4.n kernels
http://www.motorola.com/softmodem/driver.htm
and for 2.6.n only a Fedora 2.6.9-1.667 at
http://www.linux-xp-brasil.com.br/sm56-06.09.05-1-fc3-2.6.9-1.667.i686.rpm
A driver is NOT available for this kernel 2.6.18-1.2798.fc6.
Motorola seems to be only providing source code to some equipment mnaufacturers,
who may provide particular compiled Linux drivers with their products.
See details in Motorola.txt
---------------- end Motorola section ------------------------
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.1
and the compiler used in kernel assembly: 4.1.1
Kernel-header resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
kernel-source-2.6.18-1.2798.fc6
Checking pppd properties:
-r-xr-xr-x 1 root root 312956 Jul 24 2006 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
lock
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/50-udev.rules:KERNEL=="modems/mwave*", NAME="%k", GROUP="uucp", MODE="0660"
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
