Hello, guys!
I'm having a little problem with my modem. I have a Motorola SM56 and it
seems that the program ScanModen says to me that there is no driver for it
compatible with my linux distribution, Fedora Core 6.
Is it true?
What the best thing I should do? To "downgrade" to Fedora Core 3? Change
to other distro like Red Hat 9?
Thanks a lot!
Cheers,
José Fernando de Jesus
Physics Graduated
PhD Student on Astronomy(IAG-USP)
Rua do Matão 1226
Cidade Universitária
05508-900 São Paulo SP
Brasil
Phone: 55 11 30912732
email: jfernando@xxxxxxxxxxxxxxxx
(:¿©2007©?:)
Rock'n'Roll!
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry Fedora Core release 6 (Zod)
Kernel kernel 2.6.18-1.2798.fc6
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org .
Local Linux experts can be found through: http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686, Fedora Core release 6 (Zod)
Kernel
Linux version 2.6.18-1.2798.fc6 (brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Mon Oct 16 14:54:20 EDT 2006
scanModem update of: 2007_March_15
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:03.0 1057:3052 1057:3020 Modem: Motorola Unknown device 3052
Modem interrupt assignment and sharing:
169: 0 0 IO-APIC-level uhci_hcd:usb3, libata
--- Bootup diagnositcs for card in PCI slot 01:03.0 ----
ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 18 (level, low) -> IRQ 169
0000:01:03.0: ttyS1 at I/O 0xa008 (irq = 169) is a 16450
0000:01:03.0: ttyS2 at I/O 0xa010 (irq = 169) is a 8250
0000:01:03.0: ttyS3 at I/O 0xa018 (irq = 169) is a 16450
Couldn't register serial port 0000:01:03.0: -28
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
For candidate modem in PCI bus: 01:03.0
Class 0703: 1057:3052 Modem: Motorola Unknown device 3052
Primary PCI_id 1057:3052
Support type needed or chipset: Motorola
Vendor=1057 is Motorola with some service provided through
vendor=11d4 Analog Devices Inc. Drivers are available for VERY FEW 2.4.n kernels
http://www.motorola.com/softmodem/driver.htm
and for 2.6.n only a Fedora 2.6.9-1.667 at
http://www.linux-xp-brasil.com.br/sm56-06.09.05-1-fc3-2.6.9-1.667.i686.rpm
A driver is NOT available for this kernel 2.6.18-1.2798.fc6.
Motorola seems to be only providing source code to some equipment mnaufacturers,
who may provide particular compiled Linux drivers with their products.
See details in Motorola.txt
---------------- end Motorola section ------------------------
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.1
and the compiler used in kernel assembly: 4.1.1
Kernel-header resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
kernel-source-2.6.18-1.2798.fc6
Checking pppd properties:
-r-xr-xr-x 1 root root 312956 Jul 24 2006 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
lock
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/50-udev.rules:KERNEL=="modems/mwave*", NAME="%k", GROUP="uucp", MODE="0660"
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
