Should I try to use slmodem-2.9.11-20070204.tar.gz with ALSA support?
or wait for a successfull report?
Here are the AT commands from Windows in case they help any.
ATQ0V1E0 - OK
AT+GMM - H.324 video-ready rev. 1.0
AT+FCLASS=? - 0,1
AT#CLS=? - COMMAND NOT SUPPORTED
AT+GCI? - +GCI:B5
AT+GCI=? - +GCI:(00,01,02,04,06,07,09,0A,0B,0C,0D,0E,0F,10,11,12,14,15,16,19,1A,1B,1D,1E,1F,20,21,22,23,24,25,26,27,29,2B,2D,2E,2F,31,32,33,35,36,37,38,3C,3D,40,41,43,44,45,46,47,48,49,4B,4C,4D,4E,4F,50,51,52,53,54,57,58,59,5A,5B,5E,5F,61,62,63,64,66,68,69,6A,6B,6C,6D,6F,70,72,73,74,77,78,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,93,96,97,98,99,9B,9C,9F,A0,A1,A3,A4,A5,A6,A7,A8,A9,AA,AC,AD,AE,B2,B3,B4,B5,B6,B7,B8,BB,BC,BF,C1,C2,C4)
ATI1 - OK
ATI2 - OK
ATI3 - TOSHIBA Software Modem Version 2.1.73
ATI4 - Built on 08/30/2006 14:52:53
ATI5 - 2.1.73, HDA MB, HDA, A3 S-Rev:3 L-Rev:3, 19
ATI6 - OK
ATI7 - HDA MB
ATQ0V1E0 - OK
AT+GMM - H.324 video-ready rev. 1.0
AT+FCLASS=? - 0,1
AT#CLS=? - COMMAND NOT SUPPORTED
AT+GCI? - +GCI:B5
AT+GCI=? - +GCI:(00,01,02,04,06,07,09,0A,0B,0C,0D,0E,0F,10,11,12,14,15,16,19,1A,1B,1D,1E,1F,20,21,22,23,24,25,26,27,29,2B,2D,2E,2F,31,32,33,35,36,37,38,3C,3D,40,41,43,44,45,46,47,48,49,4B,4C,4D,4E,4F,50,51,52,53,54,57,58,59,5A,5B,5E,5F,61,62,63,64,66,68,69,6A,6B,6C,6D,6F,70,72,73,74,77,78,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,93,96,97,98,99,9B,9C,9F,A0,A1,A3,A4,A5,A6,A7,A8,A9,AA,AC,AD,AE,B2,B3,B4,B5,B6,B7,B8,BB,BC,BF,C1,C2,C4)
ATI1 - OK
ATI2 - OK
ATI3 - TOSHIBA Software Modem Version 2.1.73
ATI4 - Built on 08/30/2006 14:52:53
ATI5 - 2.1.73, HDA MB, HDA, A3 S-Rev:3 L-Rev:3, 19
ATI6 - OK
ATI7 - HDA MB
ATQ0V1E0 - OK
AT+GMM - H.324 video-ready rev. 1.0
AT+FCLASS=? - 0,1
AT#CLS=? - COMMAND NOT SUPPORTED
AT+GCI? - +GCI:B5
AT+GCI=? - +GCI:(00,01,02,04,06,07,09,0A,0B,0C,0D,0E,0F,10,11,12,14,15,16,19,1A,1B,1D,1E,1F,20,21,22,23,24,25,26,27,29,2B,2D,2E,2F,31,32,33,35,36,37,38,3C,3D,40,41,43,44,45,46,47,48,49,4B,4C,4D,4E,4F,50,51,52,53,54,57,58,59,5A,5B,5E,5F,61,62,63,64,66,68,69,6A,6B,6C,6D,6F,70,72,73,74,77,78,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,93,96,97,98,99,9B,9C,9F,A0,A1,A3,A4,A5,A6,A7,A8,A9,AA,AC,AD,AE,B2,B3,B4,B5,B6,B7,B8,BB,BC,BF,C1,C2,C4)
ATI1 - OK
ATI2 - OK
ATI3 - TOSHIBA Software Modem Version 2.1.73
ATI4 - Built on 08/30/2006 14:52:53
ATI5 - 2.1.73, HDA MB, HDA, A3 S-Rev:3 L-Rev:3, 19
ATI6 - OK
ATI7 - HDA MB
ATQ0V1E0 - OK
AT+GMM - H.324 video-ready rev. 1.0
AT+FCLASS=? - 0,1
AT#CLS=? - COMMAND NOT SUPPORTED
AT+GCI? - +GCI:B5
AT+GCI=? - +GCI:(00,01,02,04,06,07,09,0A,0B,0C,0D,0E,0F,10,11,12,14,15,16,19,1A,1B,1D,1E,1F,20,21,22,23,24,25,26,27,29,2B,2D,2E,2F,31,32,33,35,36,37,38,3C,3D,40,41,43,44,45,46,47,48,49,4B,4C,4D,4E,4F,50,51,52,53,54,57,58,59,5A,5B,5E,5F,61,62,63,64,66,68,69,6A,6B,6C,6D,6F,70,72,73,74,77,78,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,93,96,97,98,99,9B,9C,9F,A0,A1,A3,A4,A5,A6,A7,A8,A9,AA,AC,AD,AE,B2,B3,B4,B5,B6,B7,B8,BB,BC,BF,C1,C2,C4)
ATI1 - OK
ATI2 - OK
ATI3 - TOSHIBA Software Modem Version 2.1.73
ATI4 - Built on 08/30/2006 14:52:53
ATI5 - 2.1.73, HDA MB, HDA, A3 S-Rev:3 L-Rev:3, 19
ATI6 - OK
ATI7 - HDA MB
Thanks,
Antonio
On 4/18/07, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
> RE: /proc/asound/card0/codec#1
> -------------------------------
> Codec: Generic 11c1 Si3054
> Address: 1
> Vendor Id: 0x11c11040
> ======
> Many of softmodem chips hosted by High Definition Audio (HDA) cards
> are a minor specializations of a Silicon Instruments Si3054 base chip.
> This includes three from Vendor 11c1 AgereSystems . When the new
> 0x11c11040 appeared, it was assumed that it also was from the Si3054
> and we tried it to thus bring it into function. However there was a
> consistent failure.
>
> Last week our contacts at LSI Corporation (successor to AgereSystems,
> itself a Lucent spinoff) very informatively responded to a query about
> the 0x11c11040 chip. It is not a Si3054 specialization and is totally
> fabricated by LSI Corp. It cannot be supported within the Si3054
> support section of snd-intel-hda, as their prior 3 chips are. LSI
> does have a group working on softmodem coding. They will update us
> presently, but as usual, never give time projectons.
>
> Thus sadly for for the Vendor Id: 0x11c11040 softmodems are not supported.
> Sasha K and the ALSA snd-hda-intel maintainer have already been informed.
>
> The URL for this email will be included in my next scanModem update.
>
> MarvS
> scanModem maintainer
>
> On 4/17/07, Antonio Olivares <olivares14031@xxxxxxxxx> wrote:
> > Dear Marv,
> >
> > I have acquired a new laptop and I have sent scanModem to list, but
> > the mail has not gotten in, so I am sending it directly to you.
> >
> > Thanks,
> >
> > Antonio
> >
> >
>
