Rusty,
Please make the effort to do what ModemData.txt says for your PCTel modem.
"BEGIN QUOTE
At http://linmodems.technion.ac.il/pctel-linux
Get the pctel-0.9.7-9-rht-6.tar.gz
Unpack under Linux with:
tar zxf pctel*.tar.gz
and read instuctions therein.
Read Pctel.txt and Modem/YourSystem.txt for follow through guidance.
"END QUOTE
If even that is beyond your skills, you should try to find somebody to
help you.
VERY IMPORTANT REMARK:
You must download ...-rht-7... not ...-rht-6... for your kernel.
MARV: scanModem needs this minor update!
Jacques
Rusty Shackelford wrote:
Help I am trying to switch over to SuSe 10.2 Linux and I need some help
getting my modem configured and working. In the install the OS found the
modem but refused to tell me the information I need in order to
configure it. I am very new to Linux and have no clue as to the
translation of terms between windows and Linux so I am trying to get a
step by step set up guide to get this damn windows remnant working. I
have elected to use the KDE Desktop set up and if you can help that will
be fantastic; if not if you can at least point me in the right direction
to get that information would also be very helpful.
In the body of this email you will find the scan modem data file that
was requested on the help page
http://132.68.73.235/linmodems/index.html#scanModem I need to get this
machine on line so any instruction you all can give will be a big help.
Locally I can not find a Linux help and reference book any newer than
2002 and there appears to be many advances since then.
Thank you,
Rusty
-------------------------- System information ----------------------------
CPU=i686, Welcome to openSUSE 10.2 (i586) - Kernel
Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2
20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
scanModem update of: 2007_March_05
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:08.0 134d:7891 134d:0001 Modem: PCTel Inc HSP MicroModem 56
Modem interrupt assignment and sharing:
--- Bootup diagnositcs for card in PCI slot 01:08.0 ----
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level,
high) -> IRQ 177
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
For candidate modem in PCI bus: 01:08.0
Class 0703: 134d:7891 Modem: PCTel Inc HSP MicroModem 56
Primary PCI_id 134d:7891
Support type needed or chipset: PCTEL
At http://linmodems.technion.ac.il/pctel-linux
Get the pctel-0.9.7-9-rht-6.tar.gz
Unpack under Linux with:
tar zxf pctel*.tar.gz
and read instuctions therein.
Read Pctel.txt and Modem/YourSystem.txt for follow through guidance.
Writing Pctel.txt
Completed candidate modem analyzes.
The base of the UDEV device file system is: /rev/.devour
The kernel was compiled with gcc version 4.1.2 and a compiler is not
installed
Kernel-header resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
gcc-4.1 kernel-source-2.6.18.2-34-default
Checking pp pd properties:
-earwax-r-x 1 root dial out 295488 Nov 25 13:50 /user/bin/pp pd
In case of an "error 17" "serial loop back" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dial out without Root permission do:
$ us - root (not for Bunts)
ch mod a+x /user/bin/pp pd
or under Bunts related Linux's
ch mod a+x /user/bin/pp pd
Checking settings of: /etc/pp/options
defaulters
coauthor
sportscast
lock
modem
asynchrony 0
no detach
lip-echo-interval 30
lip-echo-failure 4
lip-max-configure 60
lip-restart 2
idle 600
nonslip
file /etc/pp/filters
In case of a message like:
Warning: Could not modify /etc/pp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: beth0
Which can interfere with Browser navigation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: modems created symbolic link
/rev/ttys0: Within /etc/devour/ files:
/etc/devour/rules.d/31-network.rules:SUBSYSTEM=="net",
ENVY{INTERFACE}=="pp*|ripply*|misdid*|lip*|lo*|Erda*|dummy*|eclipse*|tun*|tap*|bond*|van*|modem*|isl*",
GOTO="skip_if up"
/etc/devour/rules.d/50-devour-default.rules:KERNEL=="wave",
NAME="modems/%k", GROUP="uucp"
Within /etc/mod probe.con files:
/etc/mod probe.con:# Linux CAP modem (wave)
/etc/mod probe.d/blacklist:# ALAS PCI sound/modem modules - should be
configured via yacht
/etc/mod probe.d/blacklist:blacklist send-expiation-modem
/etc/mod probe.d/blacklist:blacklist send-via82xx-modem
Within any ancient /etc/delfs files:
Within ancient kernel 2.4.n /etc/module.con
files:
--------- end modem support lines --------
