Re: ModemData.txt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



ModemData.txt says:
BEGIN
The modem is supported by the Smartlink slamr driver
plus the slmodemd helper utility.  Read the
Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
END
Have you at least read these instructions?
If you did, what went wrong?

Jacques

Dinesh Hegde wrote:
I need suggestion based on my ModemData.txt which i have attached here.
Thanks


------------------------------------------------------------------------

Only plain text email is forwarded by the  DISCUSS@xxxxxxxxxxxxx List Server.
 Do use the following as the email Subject Line:
          SomeName, YourCountry Fedora Core release 6 (Zod)
Kernel  kernel 2.6.18-1.2798.fc6
 This will alert cogent experts, and  distinguish cases in the Archives.
 YourCountry will enable Country Code guidance.
 Occassionally responses are blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org .
 Local Linux experts can be found through: http://www.linux.org/groups/index.html
--------------------------  System information ----------------------------
CPU=i686,  Fedora Core release 6 (Zod)
Kernel
Linux version 2.6.18-1.2798.fc6 (brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Mon Oct 16 14:54:20 EDT 2006
 scanModem update of:  2007_Feb_28


USB modem not detected by lsusb

Modem or host audio card candidates have firmware information:

 PCI slot       PCI ID          SubsystemID     Name
 ----------     ---------       ---------       --------------
 05:0b.0        2000:2800       1801:2800       Modem: Smart Link Ltd. Unknown device 2800

 Modem interrupt assignment and sharing:

 --- Bootup diagnositcs for card in PCI slot 05:0b.0 ----
ACPI: PCI Interrupt 0000:05:0b.0[A] -> GSI 16 (level, low) -> IRQ 193
ACPI: PCI interrupt for device 0000:05:0b.0 disabled

 The PCI slot 05:0b.0 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.


 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===

 For candidate modem in PCI bus:  05:0b.0
  Class 0703: 2000:2800 Modem: Smart Link Ltd. Unknown device 2800
     Primary PCI_id  2000:2800
 Support type needed or chipset:        slamr


The modem is supported by the Smartlink slamr driver
plus the slmodemd helper utility.  Read the
Smartlink.txt and Modem/YourSystem.txt for follow through guidance.

Writing Smartlink.txt
============ end Smartlink section =====================

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.1
            and the compiler used in kernel assembly: 4.1.1

 Kernel-header resources needed for compiling are not manifestly ready!

 If compiling is necessary packages must be installed, providing:
        kernel-source-2.6.18-1.2798.fc6


Checking pppd properties:
       -r-xr-xr-x 1 root root 312956 Jul 25  2006 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
   http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
       $ su - root  (not for Ubuntu)
        chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
        chmod a+x /usr/sbin/pppd

Checking settings of:   /etc/ppp/options
lock

In case of a message like:
  Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html


 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
    /device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
    Within /etc/udev/ files:
/etc/udev/rules.d/50-udev.rules:KERNEL=="modems/mwave*",        NAME="%k", GROUP="uucp", MODE="0660"
    Within /etc/modprobe.conf files:

    Within any ancient /etc/devfs files:

    Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux