Hi Jacques,
After I ran scanMod em I opened the Modem file it
created and I read 1stRead.txt. It directed me to the
other files and I found that the more I read, the more
overwhelmed and confused I became. I really wouldn't
have asked for help if I could have found it and I
have been spending nearly all day the past 4 days
trying to get this installed. I apologize for being
aggravated, maybe you can relate. Here...have a look.
RJ
-------
/lib/modules/2.4.27-3-386/build/include/asm/system.h:
In function
`__set_64bit_v ar':
/lib/modules/2.4.27-3-386/build/include/asm/system.h:190:
warning:
dereferencing type-punned p
ointer will break strict-aliasing rules
/lib/modules/2.4.27-3-386/build/include/asm/system.h:190:
warning:
dereferencing type-punned p
ointer will break strict-aliasing rules
amrmo_init.c: At top level:
amrmo_init.c:702: error: syntax error before "int"
---------
these were lethal, breaking compile of the driver.
Could be that this
code package is too recent to support the older 2.4.27
kernel.
There are two alternative routes. You could try
compiling the older
slmdm-2.7.10.tar.gz resource. Way as well try it.
But if it fails, I would recommend installation the
Very User friendly
Debian derivative Ubuntu Edgy with 2.6.17 kernel, with
much more
current hardware suport and again using the slmodem
package. See
http://www.ubuntu.com/
MarvS
On 1/31/07, r jefferey <rjefferey@xxxxxxxxx> wrote:
> MarvS,
>
> The attached file shows what I've done today. Should
I
> be concerned with the errors?
>
> Thank you,
> RJ
> --- Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
> wrote:
>
> > RE:
> > Compiling resources appear complete:
> > make utility - /usr/bin/make
> > Compiler version 3.3
> > kernel_headers base folder
> > /lib/modules/2.4.27-3-386/build
> > ------------
> > Good. You are properly setup to compile the
drivers
> > now.
> > So the next steps are with the
> >
> > > > > > > > slmodem-2.9.11-20061021.tar.gz
> > > > > > > > Under Linux do
> > > > > > > > $ tar zxf slm*.tar.gz
> > > > > > > > $ cd slmodem-2.9.11-20061021
> > > > > > > > Look around with
> > $ ls
> > $ make clean
> > removes and old code debris
> > $ make
> > will compile the modem code, drawming on
components
> > within
> > /lib/modules/2.4.27-3-386/build/ header files.
> > Acquire root permission to do the installation of
> > products:
> > $ su root
> > $ make install
> > puts products in the correct places.
> > Reboot and test.
> >
> > MarvS
> >
> > On 1/30/07, r jefferey <rjefferey@xxxxxxxxx>
wrote:
> > > MarvS,
> > >
> > > There seems to be a few changes to the file
which
> > is
> > > attached.
> > >
> > > Thanks,
> > > RJ
> > >
> > > --- Marvin Stodolsky
<marvin.stodolsky@xxxxxxxxx>
> > > wrote:
> > >
> > > > could anything I've done so far cause
> > > > my system to lock up?
> > > > -----
> > > > Unlikely
> > > >
> > > > Run the
> > > > ./scanModem
> > > > again and send me the new ModemData.txt
> > > >
> > > >
> > > > On 1/30/07, r jefferey <rjefferey@xxxxxxxxx>
> > wrote:
> > > > > MarvS,
> > > > >
> > > > > I included a text file with this mornings
> > attempt
> > > > at
> > > > > this, I'll be back later on this evening.
The
> > > > previous
> > > > > kernel-headers I had downloaded were indeed
> > > > different.
> > > > > One other thing, could anything I've done so
> > far
> > > > cause
> > > > > my system to lock up? I left it running last
> > night
> > > > and
> > > > > found it locked up in the screen saver mode.
> > > > Sometimes
> > > > > it hangs during boot up as well, when it
says
> > > > > "Calculating dependencies ...
> > > > >
> > > > > Anyway that is another issue. I really
> > appriciate
> > > > the
> > > > > help and hopefully can return the favor
> > somehow.
> > > > >
> > > > > Thanks,
> > > > >
> > > > > RJ
> > > > >
> > > > > --- Marvin Stodolsky
> > <marvin.stodolsky@xxxxxxxxx>
> > > > > wrote:
> > > > >
> > > > > > RJ
> > > > > >
> > > > > > I can only help if you copy out the error
> > > > messages
> > > > > > and send them to me.
> > > > > > But I suspect that you didn't download a
> > > > dependent
> > > > > > file kernel-headers-2.4.27-3
> > > > > > Get that from the Debian repository and
> > again
> > > > run
> > > > > > through the instructions.
> > > > > >
> > > > > > MarvS
> > > > > >
> > > > > > On 1/29/07, r jefferey
<rjefferey@xxxxxxxxx>
> > > > wrote:
> > > > > > > MarvS,
> > > > > > >
> > > > > > > 0) slmdm-2.7.15 was never installed, I
had
> > > > > > mentioned
> > > > > > > that it was on a CD that came with the
> > > > modem... so
> > > > > > I
> > > > > > > skipped this step. Hope I didn't make
> > things
> > > > > > worse.
> > > > > > >
> > > > > > > I followed the rest of the instructions
> > and
> > > > saw
> > > > > > alot
> > > > > > > of error messages but just kept going
> > since I
> > > > > > don't
> > > > > > > really know what I'm doing.
> > > > > > >
> > > > > > > I now have the following files in my
home
> > > > file:
> > > > > > > slmodem-2.9.11-20061021
> > > > > > >
> > > > > >
> > > >
> >
kernel-headers-2.4.27-3-386_2.4.27-10sarge5_i386.deb
> > > > > > > slmodem-2.9.11-20061021.tar.gz
> > > > > > > sl-modem-daemon_2.9.9a-1_i386.deb
> > > > > > >
> > > > > > > I didn't get an automated setup after
> > > > rebooting,
> > > > > > Gnome
> > > > > > > started as it does normally....and there
> > > > doesn't
> > > > > > seem
> > > > > > > to be a wvdial in the /etc folder. I'll
> > read
> > > > > > > SmartLink.txt and Testing.txt to see
what
> > I
> > > > can
> > > > > > find
> > > > > > > out.
> > > > > > >
> > > > > > > Thanks again,
> > > > > > > RJ
> > > > > > >
> > > > > > > --- Marvin Stodolsky
> > > > <marvin.stodolsky@xxxxxxxxx>
> > > > > > > wrote:
> > > > > > >
> > > > > > > > RJ
> > > > > > > >
> > > > > > > > 0) Remove the slmdm-2.7.15 modem
> > software
> > > > > > currently
> > > > > > > > installed
> > > > > > > >
> > > > > > > > 1) at
> > http://www.debian.org/distrib/packages
> > > > > > use
> > > > > > > > the package name
> > > > > > > > search engine to find
> > > > > > > > sl-modem-daemon
> > > > > > > > After download and copying into your
> > home
> > > > folder
> > > > > > > > under Linux, the
> > > > > > > > install commands within that folder
is:
> > > > > > > > $ su root
> > > > > > > > # dpkg -i sl*.deb
> > > > > > > > This package provides bootup
automation
> > > > scripts
> > > > > > for
> > > > > > > > the modem
> > > > > > > >
> > > > > > > > 2) Setup for compiling
> > > > > > > > First install the packages
> > > > > > > > kernel-headers-2.4.27-3-386 and
> > > > > > > > kernel-headers-2.4.27-3
> > > > > > > > if they are on your install CDs,
> > > > > > > > $ su - root
> > > > > > > > # apt-get install
> > > > kernel-headers-2.4.27-3-386
> > > > > > > > will install them.
> > > > > > > >
> > > > > > > > Alternatively they can be obtained
> > through
> > > > > > searching
> > > > > > > > for package
> > > > > > > > names kernel-headers-2.4.27-3
> > > > > > > > at
> > http://www.debian.org/distrib/packages
> > > > > > > > After download and copying into your
> > home
> > > > folder
> > > > > > > > under Linux, the
> > > > > > > > install command within that folder is:
> > > > > > > > # dpkg -i kernel*.deb
> > > > > > > > Either route will complete your setup
> > for
> > > > > > compiling.
> > > > > > > >
> > > > > > > > Step 3)
> > > > > > > > From
> > > > > > > >
> > > > > >
> > > >
> >
http://linmodems.technion.ac.il/packages/smartlink/
> > > > > > > > get the
> > > > > > > > slmodem-2.9.11-20061021.tar.gz
> > > > > > > > Under Linux do
> > > > > > > > $ tar zxf slm*.tar.gz
> > > > > > > > $ cd slmodem-2.9.11-20061021
> > > > > > > > Look around with
> > > > > > > > $ ls
> > > > > > > > $ make clean
> > > > > > > > $ make
> > > > > > > > $ su root
> > > > > > > > $ make install
> > > > > > > > will install the drivers etc.
> > > > > > > >
> > > > > > > > For simplicity reboot to benefit for
the
> > > > > > automated
> > > > > > > > modem setup.
> > > > > > > > $ su root
> > > > > > > > # wvdialconf /etc/wvdial.conf
> > > > > > > > SHould find the modem.
> > > > > > > > Edit in personal info with
> > > > > > > > # gedit /etc/wvdial.conf
> > > > > > > > removing the < > symbols and adding
a
> > line
> > > > > > > > Carrier Check = no
> > > > > > > >
> > > > > > > > Dial should then be acccomplished with
> > > > > > > > # wvdial
> > > > > > > >
> > > > > > > > Read SmartLink.txt and Testing.txt
for
> > > > details
> > > > > > > >
> > > > > > > > MarvS
> > > > > > > > scanModem maintainerf
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > On 1/29/07, rjefferey@xxxxxxxxx
> > > > > > > > <rjefferey@xxxxxxxxx> wrote:
> > > > > > > > > Thanks for the help, I'm new to
Linux
> > and
> > > > am
> > > > > > > > trying to
> > > > > > > > > make the switch to Linux. I'm
setting
> > up a
> > > > > > > > computer
> > > > > > > > > for my mother to use to browse the
> > > > internet.
> > > > > > She
> > > > > > > > only
> > > > > > > > > has dial-up as an option. I have
> > Debian on
> > > > the
> > > > > > > > > computer and Gnome starts when it
> > boots
> > > > up.
> > > > > > > > >
> > > > > > > > > A cd came with the modem and has two
> > files
> > > > in
> > > > > > a
> > > > > > > > folder
> > > > > > > > > Drivers==>Linux==>slmdm-2.7.15.tar &
> > > > > > > > slmdm-dix.patch
> > > > > > > > > The "read me" file only mentions
> > > > installation
> > > > > > > > under
> > > > > > > > > RedHat (I tried to relate it to
Debian
> > > > > > > > unsuccessfully)
> > > > > > > > >
> > > > > > > > > I will continue to attempt to sort
> > > > through
> > > > > > the
> > > > > > > > > information.
> > > > > > > > >
> > > > > > > > > Thanks again,
> > > > > > > > > rjefferey
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
____________________________________________________________________________________
> > > > > > > > > TV dinner still cooling?
> > > > > > > > > Check out "Tonight's Picks" on
Yahoo!
> > TV.
> > > > > > > > > http://tv.yahoo.com/
> > > > > > > > >
> > > > > > > > > Only plain text email is forwarded
by
> > the
> > > > > > > > DISCUSS@xxxxxxxxxxxxx List Server.
> > > > > > > > > Do use the following as the email
> > Subject
> > > > > > Line:
> > > > > > > > > SomeName, YourCountry
> > Debian
> > > > > > GNU/Linux
> > > > > > > > 3.1 kernel 2.4.27-3-386
> > > > > > > > > This will alert cogent experts, and
> > > > > > distinguish
> > > > > > > > cases in the Archives.
> > > > > > > > > YourCountry will enable Country
Code
> > > > > > guidance.
> > > > > > > > > Occassionally responses are blocked
> > by an
> > > > > > > > Internet Provider mail filters.
> > > > > > > > > So in a day, also check the
Archived
> > > > > > responses at
> > > > > > > > http://www.linmodems.org .
> > > > > > > > > Local Linux experts can be found
> > through:
> > > > > > > > http://www.linux.org/groups/index.html
> > > > > > > > > -------------------------- System
> > > > information
> > > > > > > > ----------------------------
> > > > > > > > > CPU=i686, Debian GNU/Linux 3.1
> > > > > > > > > Linux version 2.4.27-3-386
(root@lart)
> > > > (gcc
> > > > > > > > version 3.3.5 (Debian 1:3.3.5-13)) #1
> > Mon
> > > > May 29
> > > > > > > > 23:50:41 UTC 2006
> > > > > > > > > scanModem update of: 2007_Jan_22
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > USB modem not detected by lsusb
> > > > > > > > >
> > > > > > > > > Modem or host audio card candidates
> > have
> > > > > > firmware
> > > > > > > > information:
> > > > > > > > >
> > > > > > > > > PCI slot PCI ID
> > > > SubsystemID
> > > > > > > > Name
> > > > > > > > > ---------- ---------
> > ---------
> > > > > > > > --------------
> > > > > > > > > 0000:01:08.0 163c:3052
> > 163c:3052
> > > > > > > > Modem: Smart Link Ltd. SmartLink
> > SmartPCI562
> > > > 56K
> > > > > > > > Modem
> > > > > > > > >
> > > > > > > > > Modem interrupt assignment and
> > sharing:
> > > > > > > > > 11: 0 XT-PIC
> > ehci_hcd,
> > > > > > > > usb-ohci
> > > > > > > > >
> > > > > > > > > --- Bootup diagnositcs for card in
> > PCI
> > > > slot
> > > > > > > > 0000:01:08.0 ----
> > > > > > > > >
> > > > > > > > > === Finished modem firmware and
> > bootup
> > > > > > > > diagnostics section. ===
> > > > > > > > > === Next deducing cogent software
===
> > > > > > > > >
> > > > > > > > > For candidate modem in PCI bus:
> > > > 0000:01:08.0
> > > > > > > > > Class 0703: 163c:3052 Modem:
Smart
> > Link
> > > > > > Ltd.
> > > > > > > > SmartLink SmartPCI562 56K Modem
> > > > > > > > > Primary PCI_id 163c:3052
> > > > > > > > > Support type needed or chipset:
> > > > slamr
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > The modem is supported by the
> > Smartlink
> > > > slamr
> > > > > > > > driver
> > > > > > > > > plus the slmodemd helper utility.
> > Read
> > > > the
> > > > > > > > > Smartlink.txt and
Modem/YourSystem.txt
> > for
> > > > > > follow
> > > > > > > > through guidance.
> > > > > > > > >
> > > > > > > > > Writing Smartlink.txt
> > > > > > > > > ============ end Smartlink section
> > > > > > > > =====================
> > > > > > > > >
> > > > > > > > > Completed candidate modem analyses.
> > > > > > > > >
> > > > > > > > > A UDEV device file system is not
> > active.
> > > > > > > > >
> > > > > > > > > Versions adequately match for the
> > > > compiler
> > > > > > > > installed: 3.3.5
> > > > > > > > > and the compiler used
in
> > > > kernel
> > > > > > > > assembly: 3.3.5
> > > > > > > > >
> > > > > > > > > Kernel-header resources needed for
> > > > compiling
> > > > > > are
> > > > > > > > not manifestly ready!
> > > > > > > > >
> > > > > > > > > If compiling is necessary packages
> > must
> > > > be
> > > > > > > > installed, providing:
> > > > > > > > > kernel-source-2.4.27-3-386
> > > > > > > > >
> > > > > > > > > Checking settings of:
> > /etc/ppp/options
> > > > > > > > > asyncmap 0
> > > > > > > > > auth
> > > > > > > > > crtscts
> > > > > > > > > lock
> > > > > > > > > hide-password
> > > > > > > > > modem
> > > > > > > > > proxyarp
> > > > > > > > > lcp-echo-interval 30
> > > > > > > > > lcp-echo-failure 4
> > > > > > > > > noipx
> > > > > > > > >
> > > > > > > > > In case of a message like:
> > > > > > > > > Warning: Could not modify
> > > > > > /etc/ppp/pap-secrets:
> > > > > > > > Permission denied
> > > > > > > > > see
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
> > > > > > > > >
> > > > > > > > > Read Modem/YourSystem.txt concerning
> > other
> > > > > > COMM
> > > > > > > > channels: eth0
> > > > > > > > > Which can interfere with Browser
> > > > naviagation.
> > > > > > > > >
> > > > > > > > > Don't worry about the following, it
> > is
> > > > for
> > > > > > the
> > > > > > > > experts
> > > > > > > > > should trouble shooting be
necessary.
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
==========================================================
> > > > > > > > >
> > > > > > > > > Checking for modem support lines:
> > > > > > > > >
> > --------------------------------------
> > > > > > > > > /device/modem symbolic link:
> > > > > > > > > slmodemd created symbolic link
> > > > /dev/ttySL0:
> > > > > > > > > Within /etc/udev/ files:
> > > > > > > > >
> > > > > > > > > Within /etc/modprobe.conf
files:
> > > > > > > > >
> > > > > > > > > Within any ancient /etc/devfs
> > files:
> > > > > > > > >
> > > > > > > > > Within ancient kernel 2.4.n
> > > > > > /etc/module.conf
> > > > > > > > files:
> > > > > > > > >
> > > > > > > > > --------- end modem support lines
> > --------
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > 1
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
____________________________________________________________________________________
> > > > > > > Food fight? Enjoy some healthy debate
> > > > > > > in the Yahoo! Answers Food & Drink Q&A.
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
http://answers.yahoo.com/dir/?link=list&sid=396545367
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> >
>
____________________________________________________________________________________
> > > > > Expecting? Get great news right away with
> > email
> > > > Auto-Check.
> > > > > Try the Yahoo! Mail Beta.
> > > > >
> > > >
> > >
> >
>
http://advision.webevents.yahoo.com/mailbeta/newmail_tools.html
> > > > >
> > > > >
> > > >
> > >
> > >
> > >
> > >
> >
>
____________________________________________________________________________________
> > > Finding fabulous fares is fun.
> > > Let Yahoo! FareChase search your favorite travel
> > sites to find flight and hotel bargains.
> > >
http://farechase.yahoo.com/promo-generic-14795097
> > >
> > > Only plain text email is forwarded by the
> > DISCUSS@xxxxxxxxxxxxx List Server.
> > > Do use the following as the email Subject Line:
> > > SomeName, YourCountry Debian
GNU/Linux
> > 3.1 kernel 2.4.27-3-386
> > > This will alert cogent experts, and
distinguish
> > cases in the Archives.
> > > YourCountry will enable Country Code guidance.
> > > Occassionally responses are blocked by an
> > Internet Provider mail filters.
> > > So in a day, also check the Archived responses
at
> > http://www.linmodems.org .
> > > Local Linux experts can be found through:
> > http://www.linux.org/groups/index.html
> > > -------------------------- System information
> > ----------------------------
> > > CPU=i686, Debian GNU/Linux 3.1
> > > Linux version 2.4.27-3-386 (root@lart) (gcc
> > version 3.3.5 (Debian 1:3.3.5-13)) #1 Mon May 29
> > 23:50:41 UTC 2006
> > > scanModem update of: 2007_Jan_22
> > >
> > >
> > > USB modem not detected by lsusb
> > >
> > > Modem or host audio card candidates have
firmware
> > information:
> > >
> > > PCI slot PCI ID SubsystemID
> > Name
> > > ---------- --------- ---------
> > --------------
> > > 0000:01:08.0 163c:3052 163c:3052
> > Modem: Smart Link Ltd. SmartLink SmartPCI562 56K
> > Modem
> > >
> > > Modem interrupt assignment and sharing:
> > > 11: 0 XT-PIC ehci_hcd,
> > usb-ohci
> > >
> > > --- Bootup diagnositcs for card in PCI slot
> > 0000:01:08.0 ----
> > >
> > > === Finished modem firmware and bootup
> > diagnostics section. ===
> > > === Next deducing cogent software ===
> > >
> > > For candidate modem in PCI bus: 0000:01:08.0
> > > Class 0703: 163c:3052 Modem: Smart Link Ltd.
> > SmartLink SmartPCI562 56K Modem
> > > Primary PCI_id 163c:3052
> > > Support type needed or chipset: slamr
> > >
> > >
> > > The modem is supported by the Smartlink slamr
> > driver
> > > plus the slmodemd helper utility. Read the
> > > Smartlink.txt and Modem/YourSystem.txt for
follow
> > through guidance.
> > >
> > > Writing Smartlink.txt
> > > ============ end Smartlink section
> > =====================
> > >
> > > Completed candidate modem analyses.
> > >
> > > A UDEV device file system is not active.
> > >
> > > Versions adequately match for the compiler
> > installed: 3.3.5
> > > and the compiler used in kernel
> > assembly: 3.3.5
> > >
> > >
> > >
> > > Compiling resources appear complete:
> > > make utility - /usr/bin/make
> > > Compiler version 3.3
> > > kernel_headers base folder
> > /lib/modules/2.4.27-3-386/build
> > >
> > > Checking settings of: /etc/ppp/options
> > > asyncmap 0
> > > auth
> > > crtscts
> > > lock
> > > hide-password
> > > modem
> > > proxyarp
> > > lcp-echo-interval 30
> > > lcp-echo-failure 4
> > > noipx
> > >
> > > In case of a message like:
> > > Warning: Could not modify
/etc/ppp/pap-secrets:
> > Permission denied
> > > see
> >
>
http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
> > >
> > > Read Modem/YourSystem.txt concerning other COMM
> > channels: eth0
> > > Which can interfere with Browser naviagation.
> > >
> > > Don't worry about the following, it is for the
> > experts
> > > should trouble shooting be necessary.
> > >
> >
>
==========================================================
> > >
> > > Checking for modem support lines:
> > > --------------------------------------
> > > /device/modem symbolic link:
> > > slmodemd created symbolic link /dev/ttySL0:
> > > Within /etc/udev/ files:
> > >
> > > Within /etc/modprobe.conf files:
> > >
> > > Within any ancient /etc/devfs files:
> > >
> > > Within ancient kernel 2.4.n
/etc/module.conf
> > files:
> > >
> > > --------- end modem support lines --------
> > >
> > >
> > >
> > >
> >
>
>
>
>
____________________________________________________________________________________
> Food fight? Enjoy some healthy debate
> in the Yahoo! Answers Food & Drink Q&A.
>
http://answers.yahoo.com/dir/?link=list&sid=396545367
>
>
--- Jacques Goldberg <Jacques.Goldberg@xxxxxxx> wrote:
> r jefferey,
>
> The stuff which is on tyour CD is basically
> correctly chosen but
> completely outdated.
>
> Your ModemData.txt says:
>
> "The modem is supported by the Smartlink slamr
> driver
> plus the slmodemd helper utility. Read the
> Smartlink.txt and Modem/YourSystem.txt for follow
> through guidance."
>
> These two files, Smartlink.txt and YourSystem.txt
> were written in the
> Modem subdirectory when you executed the scanModem
> utility.
>
> Do not hesitate to return to us if you need further
> help. But please in
> case of a problem report exactly what you did, step
> by step, with the
> exact text of the error message(s).
>
> Jacques
>
>
> r jefferey wrote:
> > Hi,
> >
> > Thanks for the help, I'm a newbie and am trying to
> > make the switch to Linux. I'm setting up a
> computer
> > for my mother to use to browse the Internet. She
> only
> > has dial-up as an option. There is a fresh install
> of
> > Ubuntu.
> >
> > A cd came with the modem and has three files in a
> > folder labeled Linux: slmdm-2.7.15.tar &
> > slmdm-dix.patch. The "read me" file only mentions
> > installation under RedHat. I have not tried to
> install
> > anything because I don't really understand what
> I'm
> > doing.
> >
> > The lspci command shows (among others things):
> > 01:08.0 Modem: Smart Link Ltd. SmartLink
> SmartPCI562
> > 56K Modem (rev 04)
> >
> > I will continue to attempt to sort through the
> > information.
> >
> > Thanks again,
> > rjefferey
> >
> >
> >
> >
>
____________________________________________________________________________________
> > TV dinner still cooling?
> > Check out "Tonight's Picks" on Yahoo! TV.
> > http://tv.yahoo.com/
> >
> >
> >
>
------------------------------------------------------------------------
> >
> > Only plain text email is forwarded by the
> DISCUSS@xxxxxxxxxxxxx List Server.
> > Do use the following as the email Subject Line:
> > SomeName, YourCountry Ubuntu 6.10
> kernel 2.6.17-10-generic
> > This will alert cogent experts, and distinguish
> cases in the Archives.
> > YourCountry will enable Country Code guidance.
> > Occassionally responses are blocked by an
> Internet Provider mail filters.
> > So in a day, also check the Archived responses at
> http://www.linmodems.org .
> > Local Linux experts can be found through:
> http://www.linux.org/groups/index.html
> > -------------------------- System information
> ----------------------------
> > CPU=i686, Ubuntu 6.10
> > Linux version 2.6.17-10-generic (root@terranova)
> (gcc version 4.1.2 20060928 (prerelease) (Ubuntu
> 4.1.1-13ubuntu5)) #2 SMP Tue Dec 5 22:28:26 UTC 2006
> (Ubuntu 2.6.17-10.34-generic)
> > scanModem update of: 2007_Jan_22
> >
> >
> > USB modem not detected by lsusb
> >
> > Modem or host audio card candidates have firmware
> information:
> >
> > PCI slot PCI ID SubsystemID Name
> > ---------- --------- --------- --------------
> > 01:08.0 163c:3052 163c:3052 Modem: Smart Link
> Ltd. SmartLink SmartPCI562 56K Modem
> >
> > Modem interrupt assignment and sharing:
> >
> > --- Bootup diagnositcs for card in PCI slot
> 01:08.0 ----
> > [17179573.524000] ACPI: PCI Interrupt
> 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level,
> low) -> IRQ 177
> > [17179573.524000] 0000:01:08.0: ttyS2 at I/O
> 0xc008 (irq = 177) is a 16450
> > [17179573.524000] 0000:01:08.0: ttyS3 at I/O
> 0xc010 (irq = 177) is a 8250
> > [17179573.524000] Couldn't register serial port
> 0000:01:08.0: -28
> >
> > === Finished modem firmware and bootup
> diagnostics section. ===
> > === Next deducing cogent software ===
> >
> > For candidate modem in PCI bus: 01:08.0
> > Class 0703: 163c:3052 Modem: Smart Link Ltd.
> SmartLink SmartPCI562 56K Modem
> > Primary PCI_id 163c:3052
> > Support type needed or chipset: slamr
> >
> >
> > The modem is supported by the Smartlink slamr
> driver
> > plus the slmodemd helper utility. Read the
> > Smartlink.txt and Modem/YourSystem.txt for follow
> through guidance.
> >
> > Writing Smartlink.txt
> > ============ end Smartlink section
> =====================
> >
> > Completed candidate modem analyses.
> >
> > The base of the UDEV device file system is:
> /dev/.udev
> >
> > Versions adequately match for the compiler
> installed: 4.1.2
> > and the compiler used in kernel
> assembly: 4.1.2
> >
> >
> >
> > Compiling resources appear complete:
> > make utility - /usr/bin/make
> > Compiler version 4.1
> > kernel_headers base folder
> /lib/modules/2.6.17-10-generic/build
> >
> >
> > Checking pppd properties:
> > -rwsr-xr-- 1 root dip 260920 2006-07-10 15:13
> /usr/sbin/pppd
> >
> > In case of an "error 17" "serial loopback"
> problem, see:
> >
>
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
> >
> > To enable dialout without Root permission do:
> > $ su - root (not for Ubuntu)
> > sudo chmod a+x /usr/sbin/pppd
> > or under Ubuntu related Linuxes
> > sudo chmod a+x /usr/sbin/pppd
> >
> > Checking settings of: /etc/ppp/options
> > asyncmap 0
> > auth
> > crtscts
> > lock
> > hide-password
> > modem
> > proxyarp
> > lcp-echo-interval 30
> > lcp-echo-failure 4
> > noipx
> >
> > In case of a message like:
> > Warning: Could not modify /etc/ppp/pap-secrets:
> Permission denied
> > see
>
http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
> >
> > Read Modem/YourSystem.txt concerning other COMM
> channels: eth0
> > Which can interfere with Browser naviagation.
> >
> > Don't worry about the following, it is for the
> experts
> > should trouble shooting be necessary.
> >
>
==========================================================
> >
> > Checking for modem support lines:
> > --------------------------------------
> > /device/modem symbolic link:
> > slmodemd created symbolic link /dev/ttySL0:
> > Within /etc/udev/ files:
> > /etc/udev/rules.d/60-symlinks.rules:# Create
> /dev/modem symlink
> >
>
/etc/udev/rules.d/60-symlinks.rules:KERNEL=="ttyLTM[0-9]*",
> SYMLINK+="modem"
> > Within /etc/modprobe.conf files:
> > /etc/modprobe.d/alsa-base:options snd-atiixp-modem
> index=-2
> > /etc/modprobe.d/alsa-base:options
> snd-via82xx-modem index=-2
> > /etc/modprobe.d/blacklist-modem:# Uncomment these
> entries in order to blacklist unwanted modem drivers
> > /etc/modprobe.d/blacklist-modem:# blacklist
> snd-atiixp-modem
> > /etc/modprobe.d/blacklist-modem:# blacklist
> snd-via82xx-modem
> > Within any ancient /etc/devfs files:
> >
> > Within ancient kernel 2.4.n /etc/module.conf
> files:
> >
> > --------- end modem support lines --------
> >
>
____________________________________________________________________________________
TV dinner still cooling?
Check out "Tonight's Picks" on Yahoo! TV.
http://tv.yahoo.com/
