On 18 Sep 2007, shemminger@xxxxxxxxxxxxxxxxxxxx wrote:
> Also since bridge is a pseudo device it has no transmit queue so there
> is no qdisc involved.
Just out of curiosity (I did not look at bridging details at all yet):
Is this 2.6.x specific?
Because on some linksys router with tomato firmware after a adding a
qdisc to br0 i get:
# uname -a
Linux linksys 2.4.20 #43 Sun May 20 18:08:39 PDT 2007 mips unknown
# ifconfig br0
br0 Link encap:Ethernet HWaddr 00:XX
inet addr:192.168.XX Bcast:192.168.XX
Mask:255.255.255.128
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:201070 errors:0 dropped:0 overruns:0 frame:0
TX packets:208548 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:32140173 (30.6 MiB) TX bytes:233464694 (222.6 MiB)
# tc -s qdisc show dev br0
qdisc tbf 8002: rate 50000Kbit burst 5993b lat 6.1ms
Sent 233670717 bytes 208735 pkts (dropped 0, overlimits 18)
Greetings
Jens
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
