I am using below script for DOWNLOADING. it is only for HTTP and HTTPS.
I have given the same prio for both. (i.e prio 1).
pls see my script given below. (last 2 lines of the script where I have highlighted in BOLD letters)
Can I have 2 tc filter rules with the same prio?
What is the proper method to write?
MY SCRIPT IS BELOW
#traffic shaping on eth1 (Downloading)
INTERFAZ_LAN=eth1
FULLBANDWIDTH=256
BANDWIDTH4LAN=64
tc qdisc del root dev $INTERFAZ_LAN
tc qdisc add dev $INTERFAZ_LAN root handle 1: htb r2q 4
tc class add dev $INTERFAZ_LAN parent 1: classid 1:2 htb rate "$FULLBANDWIDTH"Kbit
tc class add dev $INTERFAZ_LAN parent 1: classid 1:5 htb rate "$BANDWIDTH4LAN"Kbit
tc qdisc add dev $INTERFAZ_LAN parent 1:5 handle 5: sfq perturb 10
tc filter add dev $INTERFAZ_LAN parent 1: protocol ip prio 1 u32 match ip sport 80 0xffff match ip dst 192.168.102.0/24 classid 1:5
tc filter add dev $INTERFAZ_LAN parent 1: protocol ip prio 1 u32 match ip sport 443 0xffff match ip dst 192.168.102.0/24 classid 1:5
YOUR COMMENTS NEEDED.
--
Thank you
Indunil Jayasooriya
_______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
