2 ISP connection sharing problem

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,

        I have a similar question like  many asked before I know but Please help as i cant figure out where the problem is and how should I tackle.

I have 2 ISP connections. I want to share the bandwidth from both. I have copied the script from many places and created my own after changes. Problem is that only one connection is utilized at a time. Not both working. ratio of consuming bandwisth between then is around 1:30.

both connections are from dhcp that is dynamic. configuration from 1 ISP remains same and from 1 changes.

EXTERNAL_IP_2="201.81.219.95"
EXTERNAL_NETWORK_2=" 201.81.219.0"
EXTERNAL_GATEWAY_IP_2="201.81.219.1"

echo 200 T1 >> /etc/iproute2/rt_tables
echo 201 T2 >> /etc/iproute2/rt_tables

  ip route add 192.168.1.0 dev eth1 src 192.168.1.2 table T1
  ip route add default via 192.168.1.1 table T1
  ip route add $EXTERNAL_NETWORK_2 dev eth2 src $EXTERNAL_IP_2 table T2
  ip route add default via $EXTERNAL_GATEWAY_IP_2 table T2

  ip route add 192.168.3.0      dev eth0        table T1
  ip route add 192.168.1.0      dev eth1        table T1
  ip route add 127.0.0.0/8 dev lo   table T1
  ip route add 192.168.3.0      dev eth0        table T2
  ip route add $EXTERNAL_NETWORK_2      dev eth2        table T2
  ip route add 127.0.0.0/8 dev lo   table T2

  ip route add 192.168.1.0 dev eth1  src 192.168.1.2
  ip route add $EXTERNAL_NETWORK_2 dev eth2  src $EXTERNAL_IP_2

  ip route add default via $EXTERNAL_GATEWAY_IP_2

  ip rule add from 192.168.1.2 table T1
  ip rule add from $EXTERNAL_IP_2 table T2

 ip route add default scope global nexthop via 192.168.1.1 dev eth1 weight 1 nexthop via $EXTERNAL_GATEWAY_IP_2 dev eth2 weight 2


route command output is

Destination     Gateway           Genmask           Flags   Metric  Ref    Use  Iface
192.168.1.0     *                      255.255.255.255  UH      0         0        0    eth1
192.168.3.0     *                      255.255.255.0      U        0         0        0    eth0
192.168.1.0     *                      255.255.255.0      U        0         0        0    eth1
201.81.219.0    *                     255.255.255.0      U        0         0        0     eth2
default         201.81.219.1         0.0.0.0               UG      0        0        0      eth2

Problem is that the interface which is set gateway is used only. The other one remains idle.

--
Regards,
Arman
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux