Hi,
i'm sort of testing a configuration and things are not working sa i
planned.
i have the following network diagram: PC1 to 7 cnneced on the same
ethernet hub.
PC1 PC2 PC 3 PC4 PC5 PC6 on network 192.168.5.0
PC6 and PC7 on network 192.168.1.0
so PC6 work as a router. in addition, PC6 is connected to both
network on the same device eth0.
now on PC6, put a tbf on dev eth0 root with a rate 100ko/s
send data from PC1 to PC7. is the data shaped by the tbf ? i'd say
yes but it does not !!!
can someone explain me how ? is that normal ? would that happen too
if PC6 was connected to both network with different devices ?
I did this test in virtualisation with these 7 machines on my
macbookpro because i don't have the necessary hardware.
i think it doesn't change the initial problem but i'm ot 100% sure.
Thanks.
Vincent
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
