Hi, I'm trying to get HTB working correctly on Centos4 (RHEL-based) with kernel 2.6.9-34.EL. I have two gigabit network interfaces bridged together and I have created the following: tc qdisc add dev eth2 root handle 1: htb default 1 r2q 8000 tc class add dev eth2 parent 1: classid 1:1 htb rate 100Mbit burst 24k cburst 24k (I have been trying different parameters). The network is passing ~80MBits of traffic but HTB is not seeing the rate correctly (which obviously causes problems when I try to shape a sub-set of the traffic). These are approx 1 second apart: [root@ ~]# tc -s -d class sh dev eth2 class htb 1:1 root prio 0 quantum 1562 rate 100Mbit ceil 100Mbit burst 24Kb/8 mpu 0b overhead 0b cburst 24Kb/8 mpu 0b overhead 0b level 0 Sent 654872932 bytes 830973 pkts (dropped 0, overlimits 0 requeues 0) rate 7827086bit 9941pps lended: 830973 borrowed: 0 giants: 0 tokens: 1479 ctokens: 1479 [root@ ~]# tc -s -d class sh dev eth2 class htb 1:1 root prio 0 quantum 1562 rate 100Mbit ceil 100Mbit burst 24Kb/8 mpu 0b overhead 0b cburst 24Kb/8 mpu 0b overhead 0b level 0 Sent 663902498 bytes 842747 pkts (dropped 0, overlimits 0 requeues 0) rate 7827086bit 9941pps lended: 842747 borrowed: 0 giants: 0 tokens: 1527 ctokens: 1527 That's a transfer of around 9MBytes, yet HTB is only reporting just under 8Mbits/sec. Has anyone got any suggestions for me to try? Many thanks, Luke _______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
