Re: Limit for prio value

[Vinod Chandran <vinod_chandran@xxxxxxxxxxxxxxx>]

Hi all,

While surfing the code I happened to land on the following piece of code 
in the file net/sched/sch_htb.c.

if ((cl->un.leaf.prio = hopt->prio) >= TC_HTB_NUMPRIO)
                       cl->un.leaf.prio = TC_HTB_NUMPRIO - 1;

NUMPRIO is defined to eight, hence I feel the behavior.
I will be trying to change this value, still any idea behind this logic.

Thanks,
Vinod  C


Vinod Chandran wrote:

> Hi all,
>
> I am using htb for traffic classification.
> Is there a limit to the value prio can take cos when I give the 
> following command .
>
> tc class add dev eth2 classid 1:22 parent 1:2 htb rate 500Kbit ceil 
> 1000Kbit prio 8
>
> and then  check the output,  I find that the prio of 1:22 is 7, same 
> case for other values above 7.
>
> Thanks,
> Vinod C
>
>
>
> _______________________________________________
> LARTC mailing list
> LARTC@xxxxxxxxxxxxxxx
> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc