Re: Starting from scratch w/ multiple uplinks

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hey guys;

Have any of you seen the script at this page?

http://www.burnpc.com/website.nsf/all/FE5F4F294F508EB786256E600019BC30

On a side note, while balancing the 2 lines, I'm worried about web/ ftp/ssh sessions... iptables handles this, correct? I don't want my users to suddenly experience dropped connection for whatever they're using. Anyone have any experience with this?

Thanks,

--
Rafael Barrero
Gruppo Mediarete, S.r.l
r.barrero@xxxxxxxxxxxx



On May 10, 2005, at 2:56 PM, Markus Schulz wrote:

Am Dienstag, 10. Mai 2005 09:33 schrieb Rafael A Barrero:

Thanks for the link!

At the beginning of the document it states that it will not work with
two modem connections. What if both my ADSL lines are pppoe? Will
this still work?


it works fine. if i'm at home i can post my script.


Also, is patching the kernel necessary? (FC2, kernel version 2.6.5)


i think yes, but i didn't tried it without.
i've tried only the variant with only one multipath default route (without the
two additional tables for each device as mentioned in the nano howto) and
this don't work.


Markus Schulz
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc




_______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux