<snip> Hello everyone! I'm simply trying to put a PRIO inside an HTB (used to throttle). I've got interactive traffic on the network that I want to give priority (VoIP + Citrix + Video). I've used the filters in a CBQ script fine, but am having trouble adjusting them to this setup such that they properly assign the traffic. tc qdisc del root dev $e tc qdisc add dev $e root handle 1: htb default 3 tc class add dev $e parent 1: classid 1:1 htb rate $wanRate # now that we've throttled the interface, we create the PRIO queue tc qdisc add dev $e parent 1:1 handle 10: prio # instantly creates classes 10:1, 10:2, 10:2 tc qdisc add dev $e parent 10:1 handle 1: pfifo tc qdisc add dev $e parent 10:2 handle 2: pfifo tc qdisc add dev $e parent 10:3 handle 3: sfq </snip> Fixed! The problem is that htb was not seeing any of the rules that I applied to the lower stuff, so it wasn't forwarding traffic there. The fix: tc qdisc add dev $e root handle 1: htb default 1 By saying default 1, all htb traffic gets forwarded to classid 1:1, which has the PRIO queue attached. -Ron _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
