On Sunday 30 January 2005 16:00, rsenykoff@xxxxxxxxxxxxxxx wrote: > Hello everyone! > > I'm simply trying to put a PRIO inside an HTB (used to throttle). I've got > interactive traffic on the network that I want to give priority (VoIP + > Citrix + Video). > > I've used the filters in a CBQ script fine, but am having trouble > adjusting them to this setup such that they properly assign the traffic. > > tc qdisc del root dev $e > > tc qdisc add dev $e root handle 1: htb default 3 > > tc class add dev $e parent 1: classid 1:1 htb rate $wanRate > > # now that we've throttled the interface, we create the PRIO queue > tc qdisc add dev $e parent 1:1 handle 10: prio > # instantly creates classes 10:1, 10:2, 10:2 > > tc qdisc add dev $e parent 10:1 handle 1: pfifo > tc qdisc add dev $e parent 10:2 handle 2: pfifo > tc qdisc add dev $e parent 10:3 handle 3: sfq > > ############### VoIP ################ > > # IAX # this is the old format - IAX2 should be what's really seen going > on > tc filter add dev $e protocol ip parent 10: prio 1 u32 match ip sport 5036 > 0xffff flowid 10:1 > tc filter add dev $e protocol ip parent 10: prio 1 u32 match ip dport 5036 > 0xffff flowid 10:1 > > # IAX2 # > tc filter add dev $e protocol ip parent 10: prio 1 u32 match ip sport 4569 > 0xffff flowid 10:1 > tc filter add dev $e protocol ip parent 10: prio 1 u32 match ip dport 4569 > 0xffff flowid 10:1 > > # match icmp echo request > tc filter add dev $e protocol ip parent 10: prio 1 u32 match ip icmp_type > 0x08 0xff flowid 10:1 > > # match icmp echo reply > tc filter add dev $e protocol ip parent 10: prio 1 u32 match ip icmp_type > 0x00 0xff flowid 10:1 > > ## etc........... Where do you redirect the traffic to the prio qdisc ?????? Stef _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
