> >>For now try making a parent with rate and ceil 220kbit. > >>Have 4 child/leaf classes like - (assuming 1 is highest priority) > >> > >>class 1 rate 120 ceil 220 prio 0 > >>class 2 rate 50 ceil 220 prio 1 > >>class 3 rate 25 ceil 220 prio 2 > >>class 4 rate 25 ceil 220 prio 3 > >> > >>There are other tweaks you can try, it depends how much you care about > >>latency. You could also share the windows boxes bandwidth by IP. > >> > >>I don't do it quite like the above - so if it doesn't work, say and I'll > >>think again. > > > > <snip> > > > Try to make it look like I said - back off from 256 ceil, make rates add > up to master rate (220), give interactive more rate than it will ever need. Ok, im now trying: class add dev $INTERFACE parent 1: classid 1:1 htb rate 220kbit class add dev $INTERFACE parent 1:1 classid 1:20 htb rate 70kbit ceil 220kbit prio 1 class add dev $INTERFACE parent 1:1 classid 1:21 htb rate 50kbit ceil 220kbit prio 2 class add dev $INTERFACE parent 1:1 classid 1:22 htb rate 25kbit ceil 220kbit prio 3 class add dev $INTERFACE parent 1:1 classid 1:23 htb rate 25kbit ceil 220kbit prio 4 class add dev $INTERFACE parent 1:1 classid 1:24 htb rate 25kbit ceil 220kbit prio 5 class add dev $INTERFACE parent 1:1 classid 1:25 htb rate 25kbit ceil 220kbit prio 8 Its simply not working. Bittorrent is using ~22kb/sec on class 25, leaving the FTP upload (class 22) sitting on only ~3kb/sec. Any ideas? Thanks! _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
