I've read through the nano documentation, and it says that it wont handle scenarios where the main traffic is input. Also, I've read through the linuxvirtualserver documentation, and i dont think that applies to me either, as that set up intercepts traffic and manipulates the final destination IP and port for the traffic. What I would like to do is 1) from the ISP standpoint, deliver traffic for a given public IP network to a client over multiple (load balanced) links. I have a linux router on site that receives traffic for this network, but i dont know how to encapsulate / balance the traffic so it gets to the client site. 2) from the client standpoint, receive traffic for that given public IP network, deliver it accordingly to computers, and also, send out traffic from the computers on it's network with the correct public IP source address. it's actually a lot like the http://www.linuxvirtualserver.org/VS-IPTunneling.html diagram, but instead of the "server" sending / manipulating packets to go to three destinations, it's taking a complete (sub)network of 16 or so IP's and sending them directly to one computer. Any suggestions are greatly appreciated Thanks -Joe Comeaux _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
