"Brian J. Murrell" wrote: > > I have a very simple setup exactly as described in the HOWTO section " > 4.2. Routing for multiple uplinks/providers". > > My iptables "nat" setup looks like this: > > Chain POSTROUTING (policy ACCEPT 364 packets, 26735 bytes) > pkts bytes target prot opt in out source destination > 258 19801 eth1_masq all -- * eth1 0.0.0.0/0 0.0.0.0/0 > 0 0 ppp0_masq all -- * ppp0 0.0.0.0/0 0.0.0.0/0 > Any ideas what I am doing wrong? > > b. Guessing from the lack of any mention of KeepState in your iptables setup, my guess is that you ignored the advice to vist Julian Anastasov's web site. Start with this: http://www.geocities.com/mctiew/ffw/dual.htm You should also google LARTC "Finally: A working case of two adsl load balance". Read Ron Senykoff's post "load balance a file download across two connections - success!". gypsy _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
