On Wednesday 14 July 2004 05:54, Gareth Glaccum wrote: > Hi all, > Can someone please help with a tcng setup? I have played with tc and tcng > in the past, and now would like to get some serious rules in place. > However, I have a difficulty in setting them up. I'd suggest using `tc` and using Netfilter to classify traffic. There are quite a few matches you just can't do with tcng. <snip> > And I wrote out some rules. These rules seem to be correct, as far as I can > tell, but I stupidly forgot that this is all egress, and it cannot be done > as easily with ingress. Can someone please help by showing me how I can > modify these to give me control over the bandwidth in (albeit limited) as > well as out? Also could someone explain how I can easily write flows to > test all of the possible traffic I might be experiencing? tcng is supposed to let you perform all kinds of simulations on your traffic, but I have never gotten it to work. If someone has produced useful information, I'd love to know how. > My aim is, that any normal ssh to any machine, whether comming from the DMZ > to the internet, or from the LAN to the internet, should get at least 2KB/s > low-latency traffic each, even if other machines or other connections are > being made in the background. > I am wondering whether my first qdisc should infact be an SFQ and then HTBs > below it? That is not possible. sfq is a classless qdisc. It cannot contain anything. You would need to attach sfq to htb classes, instead, for instance. _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
