Edulix wrote: > BTW, Should I warn the Fedora devels about the JIFFIES problem? No. It is set to JIFFIES because that is the setting required so that all the CPUs in the kernel .config list work. If you select 386 or 486 in 'make config', make bzImage will fail because the CPU does not support a clock. 'cat /proc/cpuinfo | grep tsc' - if that would work in a .h file - would return TRUE for CPUs that do support a clock. Otherwise, the Time Of Day clock (IRQ 8) or "jiffies" (IRQ 0) should be used. > Edulix. > drivers/ide/idedriver.o drivers/cdrom/driver.o drivers/pci/driver.o > drivers/net/pcmcia/pcmcia_net.o drivers/net/wireless/wireless_net.o > drivers/pnp/pnp.o drivers/video/video.o drivers/net/hamradio/hamradio.o > drivers/media/media.o drivers/md/mddev.o drivers/isdn/vmlinux-obj.o > crypto/crypto.o drivers/sensors/sensor.o > net/network.o /usr/src/linux-2.4.22-1.2135.nptl/arch/i386/lib/lib.a /usr/src/linux-2.4.22-1.2135.nptl/lib/lib.a /usr/src/linux-2.4.22-1.2135.nptl/arch/i386/lib/lib.a > --end-group -o .tmp_vmlinux1 > drivers/ide/idedriver.o(.text+0x17570): En la función `ide_mediactl': > : undefined reference to `get_info_ptr' > make[1]: *** [kallsyms] Error 1 > make[1]: Saliendo directorio `/usr/src/linux-2.4.22-1.2135.nptl' > make: *** [vmlinux] Error 2 If anything should be reported, this is it. It says to me that you either didn't 'make clean ; make dep' or that the idedriver.c is poorly written. But, since you intend to change distros, why waste your time on this? You may want to have a look at my notes about building a 2.4.25 kernel. They are Slackware specific but they do describe most of the steps, in order (but not in detail), I take. ftp://andthatsjazz.org/pub/lartc/BUILD-2.4.25 _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
