htb bandwith

[derbel hajer <hajer_derbel@xxxxxxxx>]

Hi,

tc qdisc add dev eth0 root handle 1: htb 

tc class add dev eth0 parent 1:0 classid 1:1 htb rate 2000Kbit  ceil 2000kbit

tc class add dev eth0 parent 1:1 classid 1:2 htb rate 1200Kbit ceil 2000kbit

tc class add dev eth0parent 1:1 classid  1:3 htb rate 800Kbit ceil 2000kbit

 tc class add dev eth0 parent 1:2 classid 1:21 htb rate 600Kbit ceil 2000kbit

tc class add dev eth0 parent 1:2 classid 1:22 htb rate 300Kbit ceil 2000kbit

tc class add dev eth0 parent 1:2 classid 1:23  htb rate 200Kbit ceil 2000kbit

tc class add dev eth0 parent 1:2 classid 1:24 htb rate 100Kbit ceil 2000kbit

 tc class add dev eth0 parent 1:3 classid 1:31 htb rate 400Kbit ceil 2000kbit

tc class add dev eth0 parent 1:3 classid 1:32 htb rate 300Kbit ceil 2000kbit

tc class add dev eth0 parent 1:3 classid 1:33 htb rate 100Kbit ceil 2000kbit

By using this script, the class 1: 2 can it borrow of the 

bandwidth not used by the class 1: 3 (the classes 1:2 and 

1:3 can she borrow of the busy band among them).

I want to control the used and free busy band during time. 

For it there, I used the command: tc ?s class ls dev eth0. 

Which are the information supplied by this command, which I 

should control to draft my interpretations on the use of the bandwidth.

tkanks in advance

---

Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
Créez votre Yahoo! Mail

Dialoguez en direct avec vos amis grâce à Yahoo! Messenger !