Re: Few question on HTB

["Roy" <roy@xxxxxx>]

since you have quite complex hardware setup, you should use imq driver,
then you will be able shape any reafic and match on usefull addreses,

out script is usable, just change eth0 to imq
but if you use ipchains, then you cant use imq



----- Original Message ----- 
From: "Sandeep Agarwal" <sandeep_agarwal@xxxxxxxxxxx>
To: "Stef Coene" <stef.coene@xxxxxxxxx>
Cc: "LARTC" <lartc@xxxxxxxxxxxxxxx>
Sent: Saturday, April 03, 2004 4:34 PM
Subject: Re:  Few question on HTB


> Hello Sir,
> I have linux box with 4 NIC. 256kbps is reaching upto eth0 after router.
Now want to
> split the this bandwidh within remaining NIC's.
> I have gone through the lartc.org &amp; prepared the earlier mentioned HTB
script files.
> The name of files are
> eth0
> eth0-2.root
> eth0-2:10.comp1
> eth0-2:20.comp2
> eth0-2:30.server
> --------------------
> eth1-2:30.root
> eth1-2:30:300.all
> --------------------
> eth2-2:20.root
> eth2-2:20:200.all
> --------------------
> eth3-2:10.root
> eth3-2:10:100.all
> -----------------------------
> I have already mailed the scripts to you on your ID. If you suggest, I can
mail them
> again to you off the list.
> This is what I understand from the instruction of htb.init. Is these are
correct for the
> mentioned purpose? Or should I have to
> prepare some more / other types of files.
>
> Thanking you,
> Sandeep Agarwal
> ----- Original Message -----
> From: '"'Stef Coene'"' <stef.coene@xxxxxxxxx>
> To: '"'Sandeep Agarwal'"' <sandeep_agarwal@xxxxxxxxxxx>
> Cc: '"'LARTC'"' <lartc@xxxxxxxxxxxxxxx>
> Sent: Saturday, April 03, 2004 6:23 PM
> Subject: Re:  Few question on HTB
>
>
> On Saturday 03 April 2004 14:24, Sandeep Agarwal wrote:
> > I want to achieve the following at my gateway.
> >
> > Want to restrict   Server, Comp1 &amp; Comp2 on given
> speed.
> > --256kbps--->|eth0(203.145.134.112/255.255.255.252)
> [A]
> >
> >                        |----eth1(Server
> room)-->56kbps
> >                        | (203.145.134.120/255.255.255.248)
> [B]
> >                        |
> ----eth2(Company1)---->80kbps
> >                        | (203.145.134.116/255.255.255.252)
> [C]
> >
> >
>         &amp;
> > (192.168.100.0/255.255.255.0)
> >
> >
> |----eth3(Company2)---->120kbps
> >                        |
> (192.168.200.0/255.255.255.0)[D]
> >
> > I have RHL 9.0 with Kernel 2.4.20-8 on i686 &amp; IPCHAINS as a
> firewall.
> Ipchains is for 2.2.x kernel.  Iptables is the new firewill configuration
> tool.
>
> > Please suggest now what I have to do......???
> Correct me if I'm wrong, but you have a router with 4 interfaces.  Eth0 is
the
> internet link and you want to control bandwidth used by the 3 other
> interfaces.  Remember that you can only shape outging bandwidth if you add
a
> htb qdisc to a network interface.
>
> For shaping info, see lartc.org and docum.org.
>
> Stef
>
> --
> stef.coene@xxxxxxxxx
> '"'Using Linux as bandwidth manager'"'
> http://www.docum.org/
> #lartc @ irc.openprojects.net
>
> _______________________________________________
> LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>

_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/