Dear All, Sorry to trouble again..... After go through www.lartc.org I have implemented the HTB instead of CBQ for the same scenario. Now following files are under /etc/sysconfig/htb directory. eth0 DEFAULT=30 R2Q=10 eth0-2.root RATE=256kbps BURST=25k eth0-2:10.comp1 RATE=120kbps BURST=12k PRIO=0 LEAF=sfq RULE=192.168.200.0/24 eth0-2:20.comp2 RATE=80kbps BURST=8k PRIO=1 LEAF=sfq RULE=192.168.100.0/24 eth0-2:30.server RATE=56kbps BURST=6k PRIO=3 LEAF=sfq RULE=203.145.134.120/29 -------------------- eth1-2:30.root RATE=56kbps BURST=6k eth1-2:30:300.all RATE=56kbps BURST=6k PRIO=3 LEAF=sfq RULE=203.145.134.120/29 MARK=3 -------------------- eth2-2:20.root RATE=80kbps BURST=8k eth2-2:20:200.all RATE=80kbps BURST=8k PRIO=1 LEAF=sfq RULE=192.168.100.0/24 MARK=2 -------------------- eth3-2:10.root RATE=120kbps BURST=12k eth3-2:10:100.all RATE=120kbps BURST=12k PRIO=0 LEAF=sfq RULE=192.168.200.0/24 MARK=1 ----------------------------- When I have run # service htb.init start # it returns nothing . Is it OK? Also stats returns nothing. Are the above configuration files OK? Thanking you, Sandeep Agarwal ----- Original Message ----- From: "Sandeep Agarwal" <sandeep_agarwal@xxxxxxxxxxx> To: "LARTC" <lartc@xxxxxxxxxxxxxxx> Sent: Monday, March 29, 2004 5:08 PM Subject: Suggestion required on CBQ !!!!!! > Dear Sir, > [snip] > ------------------------------------------------------------------------------------- > - > Scenario: Restrict Server, Comp1 & Comp2 on given speed. > --256kbps---|eth0(203.145.134.112/255.255.255.252) > |----eth1(Server room) 56kbps (203.145.134.120/255.255.255.248) > |----eth2(Company2) 80kbps (203.145.134.116/255.255.255.252) > & > (192.168.100.0/255.255.255.0) > |----eth3(Company1) 120kbps(192.168.200.0/255.255.255.0) > [snip] > _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
