2 public interfaces (eth0 and ppp0), with 2 public IP addresses.
I can ping and connect to both interface's IP address. I can login with ssh, anything on _both_ IP address.
But iptables DNAT works only for eth0.
Here are my settings:
(ppp is initialized with 'pptp provider.ip')
--- /etc/ppp/options ---
nodefaultroute noipdefault name "adsluser@provider" linkname "adsl" noauth debug mtu 1400 mru 1400
--- ip route settings ---
Just like in the Adv-Routing-HowTo (4.2.1. Split access), except for the different IP addresses.
--- iptables ---
iptables -t nat -N ROUTING1 iptables -t nat -N ROUTING2
iptables -t nat -A PREROUTING -p tcp -i eth0 -j ROUTING1 iptables -t nat -A PREROUTING -p tcp -i ppp0 -j ROUTING1
iptables -t nat -A ROUTING1 -p tcp -j ROUTING2 -s $clientip1/32 iptables -t nat -A ROUTING1 -p tcp -j ROUTING2 -s $clientip2/32
iptables -t nat -A ROUTING2 -p tcp -j LOG --dport 3389 --log-prefix "FW: MSTSC connection attempt " --log-level warn
iptables -t nat -A ROUTING2 -p tcp -j DNAT --dport 3389 --to-destination 192.168.100.23:3389
---
eth2 is the 3rd interface, with access to our 192.168.100.* private network.
-- The result: --
I can reach both interfaces (from the Internet), I can connect through them to the firewall.
But DNAT works only with the eth0 interface.
Strange: iptables LOG rule is fired for ppp0 and eth0 connections, but eth0 connections are successful, and at the same time: ppp0 connections are just waiting without anything coming back.
But as you can see, the packets for both go the same way in iptables.
--- tcpdump ---
If I go through ppp0, nothing can be seen on the inner interface (eth2). The packets seem to get lost somewhere, so nothing (nothing at all) goes back to the client, who tries to connect.
Thanks in advance
-- Gábor Gludovátz <gabor@xxxxxxxxxxxxx> / +36 (70) 520 31 62 http://www.gludovatz.com/ ... ... .. .. . .
_______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
