Re: Filters not working

[Jose Araujo <jlaraujo@xxxxxxxxxxxxxxxx>]

Hy.

The solution I am going to give you might seem strange, but it worked 
with me on a project I'm working and hope to release soon.


Scott Gagon wrote:

> tc class add dev $TC_DEV parent 1: classid 1:1 htb rate ${TC_UPLINK}kbit burst 6k
>
> # high prio class 1:10:
>
> tc class add dev $TC_DEV parent 1:1 classid 1:10 htb rate ${TC_UPLINK}kbit burst 6k prio 1
>  
Remove the prio from your class configurations, it seem to cause some 
strange problems (at least with me, but i can't use the last htb 
version, mine is 3.1 something, can't check it now).

> Thanks so much!  I have to say, this has been a learning experience! :\
Hope it helps.

José Araújo

_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/