Thanks! Your suggestion didn't exactly work, but it led me to experiment with the prio statements on the filters too. Changing them so they have unique prio statements appears to have fixed the problem. Thanks again! -- Best regards, Scott mailto:sgagon@xxxxxxxxxxxxx Monday, March 1, 2004, 2:20:36 PM, you wrote: JA> Hy. JA> The solution I am going to give you might seem strange, but it worked JA> with me on a project I'm working and hope to release soon. JA> Scott Gagon wrote: >>tc class add dev $TC_DEV parent 1: classid 1:1 htb rate ${TC_UPLINK}kbit burst 6k >> >># high prio class 1:10: >> >>tc class add dev $TC_DEV parent 1:1 classid 1:10 htb rate ${TC_UPLINK}kbit burst 6k prio 1 >> >> JA> Remove the prio from your class configurations, it seem to cause some JA> strange problems (at least with me, but i can't use the last htb JA> version, mine is 3.1 something, can't check it now). >>Thanks so much! I have to say, this has been a learning experience! :\ >> JA> Hope it helps. JA> José Araújo JA> _______________________________________________ JA> LARTC mailing list / LARTC@xxxxxxxxxxxxxxx JA> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
