Hi Roy, Excelent Roy!!! Good job. Where we can get your IMQ port to test? Best Regards Remus ----- Original Message ----- From: "Roy" <roy@xxxxxx> To: <lartc@xxxxxxxxxxxxxxx> Sent: Sunday, January 25, 2004 3:49 AM Subject: Re: IMQ Stability > Internet (eth0) <-> ppp0 ----- ppp1 <-> LAN (eth1) 10.0.0.0/8 > > > this way dont seem excelent because it still lacks some functionality > and what about using LO or dummy type interface instead of ppp? > > the new imq driver that i am developing will have unlimited posibilities > it willbe fake interface wich passes all ip trafic without exception no > mater which direction, destination and so on > even localy generated and received trafic should pass it > I removed iptables module so noo need to configure it just everything is > catched. > so you will be able to shape in + out in one > > also I am thinking about the chaining functionality > is there any need to make chain of imq devices ? ( they will get the all > same trafic) > you will be able to use few shapers then but it will add latency. > > I almost finished my driver , but unfortunately there is no way to avoid > patching kernel. > > I need to export ip_finish_output2 and ip_local_deliver_finish functions but > dont know how to do that, and where is the best place. > > > > > _______________________________________________ > LARTC mailing list / LARTC@xxxxxxxxxxxxxxx > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
