Quoting Ira Abramov, from the post of Wed, 19 Nov: > I have a router machine, kernel 2.4.20 with 4 physical interfaces (but > many more virtual ones over differel VLANs). we need to NAT/route > between hosts on different VLANs, but with the same address, for > instance, 10.0.0.2 reachable via eth0.2 needs to talk to 10.0.0.2 which > is on eth0.3. I'll simplify it further. What I need is a mechanism that translates the source BEFORE routing and then the destination AFTER routing. is that possible with iproute2 or do I need to resort to netfilter? -- All rights reserved Ira Abramov http://ira.abramov.org/email/ _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
