Hi all
i was going through the documents
i need to achive the following setup, but iam confused to deploy
but some one recomed me what will be good
------------------------
offic ------------------------ other office ----- Switch ----lan users
___________________
--- fiber link
___ wireless link
now i want fiber both the links to be load balance from other office to this
office
when one fiber down, it shoould shift to other fiber with full load
if other fiber down, it should shift to wireless
other side i have PC with 4 ethernet cards
1 connected to 1st fiber
2nd connected to 2nd fiber
3 is connected to wireless
4th is connect to local LAN of other side of office
OFFICE side all connected to to my 3548XL Cisco Switch
i dont want to give any IP's to 1 2 3, they should work in bridge mode
4th will have one of the IP range of OFFICE .
iam using RH 9.0 with all patches
any one recomend me how can i achive this setup
thanks in advance for the advice
hare
_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
