Hep Dear Listmembers and Stef!
Setup
Internet
eth0
|
|
-----------------
| | | |
eth1 eth2 eth3 eth4 <--- Lan .10/24 .11/24 etc
All Lans are natted to eth0
Now i use wondershaper (1.1a) on eth0 to shap interactive traffic
(work allready thanks!) But i have a special requirments for
priorities
samba traffic from eth1 to internet. Ive done this with the following
lines in iptables and wondershaper :
iptables :
$IPTABLES -A PREROUTING -t mangle -p tcp --dport 137:139 -i eth1 -j
MARK --set-mark 2
$IPTABLES -A PREROUTING -t mangle -p udp --dport 137:139 -i eth1 -j
MARK --set-mark 2
wondershaper :
tc filter add dev $DEV parent 1:0 protocol ip prio 1 handle 2 fw
classid 1:10
This setup seems to work partly. When i browser network on anohter
host over internet i get no lag and fast response (low latency).
But when i try to edit file (3kb) it takes around 10 seconds to save
the file? Since my connection is 2048/512 and ive set my UPLINK=450 it
should take no more than 1-2 secs to update a file over internet? What
am i overlooking here?
--
Venlig hilsen/Kind regards
Thomas Kirk
ARKENA
tlf/phone +4570233456
thomas(at)arkena(dot)com
Http://www.arkena.com
"It's naive to think you can change a person--except maybe that
boy who works in the library." -- Lisa Simpson
_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
