On Thursday 09 October 2003 10:42, Thomas Kirk wrote:
> Hep Dear Listmembers and Stef!
>
> Setup
>
> Internet
> eth0
>
>
> -----------------
>
> eth1 eth2 eth3 eth4 <--- Lan .10/24 .11/24 etc
>
>
> All Lans are natted to eth0
>
> Now i use wondershaper (1.1a) on eth0 to shap interactive traffic
> (work allready thanks!) But i have a special requirments for
> priorities
> samba traffic from eth1 to internet. Ive done this with the following
> lines in iptables and wondershaper :
>
> iptables :
>
> $IPTABLES -A PREROUTING -t mangle -p tcp --dport 137:139 -i eth1 -j
> MARK --set-mark 2
> $IPTABLES -A PREROUTING -t mangle -p udp --dport 137:139 -i eth1 -j
> MARK --set-mark 2
>
> wondershaper :
>
> tc filter add dev $DEV parent 1:0 protocol ip prio 1 handle 2 fw
> classid 1:10
>
> This setup seems to work partly. When i browser network on anohter
> host over internet i get no lag and fast response (low latency).
> But when i try to edit file (3kb) it takes around 10 seconds to save
> the file? Since my connection is 2048/512 and ive set my UPLINK=450 it
> should take no more than 1-2 secs to update a file over internet? What
> am i overlooking here?
Can you check the timeout with a simple ping? And what about making a
directory or copying a file ?
Stef
--
stef.coene@xxxxxxxxx
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
