On Tue, Jul 08, 2003 at 12:50:26PM +0300, Hasso Tepper wrote: HT>Alexander Trotsai wrote: HT>> May you need mark packets with iptables and one IMQ device HT>> with htb queue HT>> Something like HT>> iptables -t mangle -A PREROUTING -i intf1 -j MARK --set-mark 1 HT>> ..... HT>> iptables -t mangle -A PREROUTING -i intfN -j MARK --set-mark N HT>> iptables -t mangle -A PREROUTING -j IMQ HT>> HT>> And to imq0 attach HTB qdisc with shaping according to mark HT>> value HT>Yes, I thought about it, but it will make management a lot more HT>complicated. If I have to change rate on one vlan only? At the HT>moment: HT>Up: HT>iptables -t mangle -A PREROUTING -i eth1.$d+ -j IMQ --todev $d HT>tc qdisc add dev eth1.$d root tbf rate ... HT>tc qdisc add dev imq$d root tbf rate ... HT>ip link set imq$d up HT>Down: HT>iptables -t mangle -D PREROUTING -i eth1.$d+ -j IMQ --todev $d HT>tc qdisc del dev eth1.$d root HT>tc qdisc del dev imq$d root HT>ip link set imq$d down HT>I made wrapper script, which takes device number and shaping HT>parameters from command line. I can change shaping parameters on any HT>vlan without affecting others. Set mark equal to vlan number Then If you need change rate tell tc class change classid <MAJOR>:<VLANID> rate <new rate> -- Best regard, Aleksander Trotsai aka MAGE-RIPE aka MAGE-UANIC My PGP key at ftp://blackhole.adamant.ua/pgp/trotsai.key[.asc] Big trouble - clock speed
