|
Hi All !
I've been running into some minor problems with a
linux box we installed as a Domain.
The linux server serves two networks as
follows:
192.168.1.0/25 on eth0
192.168.128/25 on eth1
The good thing is that all machines on both
networks can SEE each other including 'pinging' each other.
After installing an Win 95 Internet Gateway on
192.168.1.2 ... only machines in the 192.168.1.0/25 network can use it to
connect to the internet but not the ones in the 192.168.1.128/25
network.
I've also done some reading on lartc.org but
couldn't get any help... or maybe its just too complicated for me :( but I've
included some info from our server as a result of my readings which I thought
would be helpful..
ip route list table main
192.168.1.0/25 dev eth0 scope link
192.168.1.128/25 dev eth0 scope link
127.0.0.0/8 dev lo scope link
ip route table local
local 192.168.1.1 dev eth0 proto kernel scope host src 192.168.1.1
broadcast 192.168.1.0 dev eth0 proto kernel scope link src
192.168.1.1
broadcast 127.255.255.0 dev lo proto kernel scope link src
127.0.0.1
local 192.168.1.129 dev eth1 proto kernel scope host src
192.168.1.129
broadcast 192.168.1.128 dev eth1 proto kernel scope link src
192.168.1.129
broadcast 192.168.1.255 dev eth1 proto kernel scope link src
192.168.1.129
broadcast 192.168.1.127 dev eth0 proto kernel scope link src
192.168.1.1
local 127.0.0.1 dev lo proto kernel scope host 127.0.0.1
local 127.0.0.0/8 dev lo proto kernel scope host
127.0.0.1 If anyone could kindly offer me some pointers
on how to get the other network to connect to the internet via the Internet
Gateway, I would be very grateful.
Thanks again in advance...
Karotu |
