Looking at the LARTC document on page 65, the sample htb configuration, it should be the first one. cheers yuan On Tue, 2003-05-06 at 19:10, Vitor Carlos Flausino wrote: > Hi all. > > I have the following queue: > > > tc qdisc add dev eth0 root handle 1:0 htb default 15 > > > tc class add dev eth0 parent 1:0 classid 1:1 htb rate 100mbit ceil 100mbit > > tc class add dev eth0 parent 1:1 classid 1:7 htb rate 64kbit ceil 64kbit > tc class add dev eth0 parent 1:1 classid 1:15 htb rate 102336kbit ceil > 100mbit > > tc qdisc add dev eth0 parent 1:7 handle 10:0 sfq perturb 10 > tc qdisc add dev eth0 parent 1:15 handle 20:0 sfq perturb 10 > > Now, my question is, the filter should be: > > tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip > 57.227.234.22 flowid 1:7 > > or, > > tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip > 57.227.234.22 flowid 10:0 > > ? > > What about the default? > > Thankx, > -vcf > > _______________________________________________ > LARTC mailing list / LARTC@xxxxxxxxxxxxxxx > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
