On Thursday 01 May 2003 19:28, Mel Gorman wrote:
> This is quiet possibly a simple and obvious question but I'm only getting
> to grips with traffic shaping and filtering. I have a firewall with two
> ethernet connections, one internal (eth0) and one external to a modem
> (eth1). I'm trying to set up a filter on eth1 that will give interactive
> traffic high priority outgoing and limit downloads to a fixed rate. This
> is what I thought wondershaper was meant to do.
>
> However, on the last line of the script
>
> tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip src \
> 0.0.0.0/0 police rate ${DOWNLINK}kbit burst 10k drop flowid :1
>
> All traffic will be dropped and I can't figure out why. Any help would be
> appreciated or at least a pointer to the right section to start reading.
> Rooting through the archives didn't seem to have an obvious answer and
> neither did the HOWTO but that is likely to be my pooor understanding more
> than anything else
I can remember me a problem with this line. Do you have ingress support in
your kernel?
Stef
--
stef.coene@xxxxxxxxx
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
