Abbreviations:
IFI internal interface
IPI IP address of internal interface
NMI netmask for the internal interface
IFE1, IFE2 external interfaces
IPE1, IPE2 external IP address
NWE1, NWE2 external network address
NME1, NME2 mask for the external network (number of bits, like in /24)
BRD1, BRD2 broadcast address for external network
GWE1, GWE2 gateway for external interface
I am tyring to setup a gw with a cable modem and a dialup connection.
Following the nano.txt, i cant figure out how to define ppp0
ppp0 Link encap:Point-to-Point Protocol
inet addr:166.50.32.206 P-t-P:166.50.32.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:4 errors:2 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:40 (40.0 b) TX bytes:92 (92.0 b)
since there is no broadcast or network address that i can tell.
what do i put for these variables..
thx
